1.
Represents a double-pole, single-throw switch. Right-click for open and closed positions.
表示双刀单掷开关。右击指定断开或闭合位置。
2.
Represents a double-pole, single-throw switch. Open and closed positions can be specified.
表示双刀单掷开关。可指定断开和闭合位置。
3.
Drag onto the page, then right-click to specify open or closed positions.
拖到绘图页上，然后右击可指定为断开或闭合位置。
4.
in off position
在关闭状态(位置)
5.
Automatic closing of the machine after expiry of the evacuating time with way-dependent switching over from fast closing to pressing speed.
在抽真空时间终止之后，机器自动闭合，位置关系从快闭合切换到压合速度。
6.
undervoltage no-close release
低电压不闭合释放装置
7.
peak making current of pole of switching device
开关装置峰值闭合电流
8.
The indexing pawl advances a fastener into operative engagement with the feed pawl upon movement of the second canister portion from the open position to the closed position.
当第二筒部从打开位置移动到关闭位置时，分度棘爪使紧固件前进并使其与进给棘爪工作啮合。
9.
TURN IGNITION FROM THE OFF POSITION TO THE ON (RUN) POSITION.
把点火开关由关闭位置转到打开（运行）位置。
10.
Concept discrimination between angle closure error and azimuth closure error of connection traverse
附合导线角度闭合差和方位角闭合差概念辨析
11.
Drag the Close button to its window location.
将“关闭”按钮拖到它所在的窗口位置。
12.
The close-form solution is obtained.
获得了机器人逆位置分析的封闭解。
13.
Wipers Not Parking in the Off Position
雨刷在关闭位置不能停止
14.
To release from a closed or fastened position.
打开从关闭的或固定的位置上移开
15.
Verify the right toe setting and turn off engine.
验证右车轮着地位置设定并关闭引擎。
16.
Closed Loop Control Method to Correct Position Phase for Sensorless Brushless DC Motor
校正无位置传感器无刷直流电机位置信号相位的闭环控制策略
17.
17 cases were opened to corrected dislocation, 9 cases were clos ed.
闭合复位 17例 ,开放复位 9例。
18.
Design of a New Type of Cylinder of Simultaneous Closing Device of a Hot Press
热压机同时闭合装置的新型油缸设计