1.
Dimensions for mounting rolling bearings
GB/T5868-1986滚动轴承安装尺寸
2.
" Spherical plain bearings, joint type-Abutment and fillet dimensions"
GB/T12765-1991关节轴承安装尺寸
3.
Small drops of glass can be used instead of jewels in many electric instruments.
玻璃颗粒可代替宝石轴承安装在电器仪表内。
4.
The Installation and Test of the Hydraulic Turbine Guide Bearing of Three Gorges Right Bank Power Station
三峡右岸机组水导轴承安装及调试特点
5.
"Semifinished main bearings require finishing and fitting after installation, so that the crankshaft must be taken out."
半精加工的主轴承安装后需要修整和调配,这样曲轴就必须拆下。
6.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
7.
Install axle shaft bearing with Installer 6436 and Handle C–417Ensure part number on the bearing is against the installer.
用安装工具6436和手柄C–4171安装车轴轴承。确保轴承上的零件号对着安装工具。
8.
Install axle shaft bearing with Installer 6436 and Handle C–417Ensure that the part number on the bearing is against the installer.
用安装工具6436和柄C–4171安装主动轴轴承。要保证轴承部件号码对着安装工具。
9.
plain bearing housing with bearings
装有轴承的普通轴承座
10.
housing bearing plain without bearings
未装轴承的普通轴承座
11.
KEEP BEARING STRAIGHT DURING INSTALLATION TO AVOID DAMAGE
安装时，保持轴承正直以免损坏。
12.
Upper Main Bearing Removal and Installation with Tool C-3059
用工具C-3059进行上主轴承拆卸与安装
13.
Install pinion front bearing, if necessary.
如需要，安装小齿轮前轴承。
14.
First you need the boring for the shaft, then install the stern tube into the stern frame, next fit the gun-metal or white-metal bush.
首先要镗孔，然后安装尾轴管，接下来装炮铜或白合金制的轴承套，也叫轴承。
15.
Place 4 adapter blocks so they do not damage the bearing cag
安装4个接头垫块，以免损坏轴承弹子盘盖。
16.
Install the new upper rear bearing oil seal with the white paint facing towards the rear of the engine.
安装新的上后轴承油封，使白漆面向引擎后部。
17.
Sparated Bearing block for main transmission shaft Easy for maintenance and fix.
主传动轴承座可分拆结构,方便安装及维护.
18.
Research on Assembly Reliability and Sealing Properties of the Bearing Sealed Ring;
轴承密封件安装稳定性与密封特性研究