1.
Readily accessible lubrication and inspection points are incorporated into the design for increased maintenance serviceability.
容易靠近的加油孔和检查点合并为一体的设计，使维护更容易。
2.
D Punching Oil BS also contains anti corrosion & lubricity additives.
壳牌冲孔油bs含有防腐蚀添加剂和油性添加剂.
3.
Punching Oil BS also contains anti corrosion & lubricity additives.
壳牌冲孔油bs含有防腐蚀添加剂和油性添加剂
4.
Quality Questions Study of Diesel Engine Cylinder Block Bore and Cylinder Bore Machining;
柴油机机体缸孔及缸套孔加工质量问题探讨
5.
Finishing Technology of Large Diameter Blind Holes in Hydraulic Oil Tank Case
液压油箱壳体大盲孔的光整加工技术
6.
Quality Optimization of Cylinder Bore Surfaces for TJ376Q Gasoline Engines;
TJ376Q汽油机气缸体缸孔加工质量优化
7.
Study of Dry Thin Wall Cylinder Liner for Diesel Enginecylinder Block Bore and Cylinder Bore Machining;
干式薄壁套柴油机机体缸孔及缸套孔加工的探讨
8.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
9.
Research on Micro-Spray-Hole EDM Machine Tool and the Control System
微细喷油孔电火花加工机床及其控制系统研究
10.
Research on the Control System of Micro Spray-hole EDM Machine Tool
微细喷油孔电火花加工机床控制系统研究
11.
An Analysis of the Machining and the Technological Improvement of Blind Hole Threads of a Carburetor Body
化油器本体盲孔螺纹的加工分析及工艺改进
12.
Research on Processing Technique of Slant Oil- hole through Big-side in the Body of Engine
发动机机体通大侧面斜油孔加工工艺研究
13.
Very low viscosity oil for punching & stamping of ferrous & non ferrous material.
极低粘度金属加工油，适合黑色金属和有色金属的冲孔和冲压加工。
14.
Plug the fixed containers around air vent of F.O. tanks.
收紧油舱透气孔处油池放油孔的塞子。
15.
Newtown school! Go, go, go!
新城学校！加油，加油，加油！
16.
Come on! Come on, Tortoise!
加油！加油，海龟。
17.
Discussion on Hydraulic Sand Fracturing Technique in Low Porous, Low Permeable Sand Reservoirs of Carboniferous System in Tahe Oilfield
塔河油田石炭系低孔低渗砂砾岩储层水力加砂压裂技术探讨
18.
Preparation,characterization and catalytic performance of novel macroporous catalysts for heavy oil hydrogenation
新型大孔结构重油加氢催化剂的制备、表征与评价