1.
REAR BUMPER REINFORCEMENT
将后保险杆加强组件
2.
Separate the reflector from the rear bumper .
从保险杆分离反射镜。
3.
new mechanical bumper jack
新式机力保险杆起重器
4.
Remove lower bolts that attach bumper to bumper support brackets.
拆去连结保险杆到保险杆支架的下部螺帽。
5.
Position front bumper reinforcement on vehicle.
将前保险杆加强组件置于车轮。
6.
Install fascia onto bumper assembly.
将仪表板安装在保险杆组合上。
7.
The salesman reversed his car into a wall and bent the bumper.
销货员倒车时撞到墙，把保险杆撞弯了。
8.
Position and center the sling under and forward of the rear bumper.
在后保险杆前下定位并且设置方吊环。
9.
Barely kissed the other car with the Bumper.
保险杆勉强擦过另外一辆车
10.
Separate the end cap from the bumper.
将末端端盖和保险杆分隔开。
11.
Place the sling crossbar under and forward of the bumper.
将车门门槛横梁放在保险杆的前下方。
12.
Application:1. Front & Rear Car Bumper
产品应用:1.汽车前、后保险杆
13.
Position the end cap on the rear of the retainer and the outer edge of the bumper.
在扣件尾部和保险杆边缘外部定位末端端盖。
14.
If necessary, remove bolts attaching bumper mounting brackets to frame.
如果需要，拆去连接保险杆固定托架到车架的螺栓。
15.
Install push-in fasteners holding trunk lid slam bumpers to top of fascia.
安装将行李厢盖沿保险杆紧固到面板顶部上的推进式固定件。
16.
Install plastic rivets to hold bottom of rear fascia to bumper reinforcement.
将固定后面板在保险杆加强组件的塑胶铆钉安装好。
17.
A usually metal or rubber bar attached to either end of a motor vehicle, such as a truck or car, to absorb impact in a collision.
保险杆与机动车如卡车或轿车的任一端相连的，用来减少碰撞中的冲击的金属杆或橡能上能下杆
18.
"bumper:a usually metal or rubber bar attached to either end of a motor vehicle, such as a truck or car, to absorb impact in a collision."
保险杆:与机动车如卡车或轿车的任一端相连的,用来减少碰撞中的冲击的金属杆或橡能上能下杆。