1.
The vise (parallel-jaw vice) is available to all of the bench work.
所有的钳工工作都可使用台钳（平口钳）。
2.
The scored jaws of a vise help it bite the work.
台钳上有刻痕的虎钳牙帮助它紧咬住工件。
3.
The surface of the table is cut with T slots so that workholding devices such as the vise can be clamped to them.
工作台的表面切有T形槽以便工件夹具，如台钳，能固定在T形槽上。
4.
parallel swivel bench vice
平行轮轴钳工台虎钳
5.
After grasping the abutment with the forceps, apply a tapping force on the handle of the forceps away from and in the long axis of the implant.
就是钳住了支台之后扣打钳子柄顺著植体直长线将支台扣离植体。
6.
The vice is bolted to the work-bench.
老虎钳是用螺栓拧在工作台上的.
7.
DESIGN AND CALCULATION OF THE CLIP OF THE POWER MOTOR TEST STAND USED IN THE WELL
井底动力马达试验台架夹紧钳的设计和计算
8.
Design and calculation of the clip of the screw rod motor test stand used in the well
井底螺杆马达试验台架夹紧钳的设计和计算
9.
The Virtual Assembly and Motion Simulation of Machine-table Vice Basing on Solidworks
基于SolidWorks的机用台虎钳虚拟装配及运动仿真
10.
And the little tailor took the bear over to the workbench and fixed its paws firmly in the vise.
小裁缝把熊带到工作台，把它的爪子牢牢固定在虎头钳上。
11.
To remove an abutment using forceps grasp the abutment with a definite purchase and apply a simultaneous twisting and pulling motion to release the abutment from the implant.
要拔除一颗支台是用钳子抓牢支台，同时加上旋转及拔起动作即能将支台离开植体。
12.
appendix intestinal clamp
阑尾肠钳，肠夹持钳
13.
intestinal anastomosis forceps
三翼肠钳，肠吻合钳
14.
piston ring plier(piston ring tongs)
活塞环钳（活塞环拆装钳）
15.
pulling-in dogs
(拉拔用的)夹料钳，牵引链钳，带头线钳
16.
It is forbidden to hold the work-piece by hand to drill holes. The work-piece must be fixed tightly in jaw vice or fixed it on the worktable with press plate.
禁止用手握住工件进行钻孔，应该把工件紧固在虎钳中或用压板固定在工作台上。
17.
Optional parts include swivel.rotary hose,elevator link,hydraulic tong ,air spiders,lelly bushivg,rotarytable and substructure (with ramp and oadder)etc.
选配件包括水龙头和水龙带、吊环、液压大钳、气动卡盘、转盘、钻台（带滑道和梯子）等。
18.
pincer movement
ph.1. 【军】钳形运动