1.
Enter the ratio of the duct width to the inside radius of the bend. Enter '0' for no inside radius.
输入管道宽度与弯头内半径的比率。如果没有内半径，则输入“0”。
2.
within a radius of three miles
在半径三英里范围以内
3.
ALL INSIDE CORNERS TO BE .38 RADIUS MAX
所有内角最大半径0.38
4.
T-Radii and Borel Radii of Meromorphic Functions of Infinite Order in the Unit Disc
单位圆内无穷级亚纯函数的T-半径和Borel半径
5.
TUBE DIAMETER SHALL BE WITHIN 10% OF NOMINAL DIAMETER WITHIN BEND RADIUS.
管直径须在直径理论值和折弯半径的10%以内。
6.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
刀尖圆弧半径补偿在内外径车削加工中的应用
7.
Enter the radius of curvature, as measured from the inside of the stalls.
输入曲面的半径，从隔栏内量起。
8.
make sure that no person or object is within a 5 meter radius.
保证5米半径范围内没有任何人或物
9.
THE T RADII OF ZERO ORDER K-QUASIMEROMORPHIC MAPPINGS IN THE UNITE DISK
单位圆内零级K-拟亚纯映射的T半径
10.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺
11.
Single corner curb with built-in ramp. Corner radius can be specified.
内有斜坡的单拐角路缘。可指定拐角的半径。
12.
The shock from the explosion crushed the rock to a radius of 130 feet.
爆炸形成的冲击波把130英尺半径内的岩石捣碎。
13.
every family within a radius of 25 miles of the city center.
住在离城中心半径25英里的范围内的家庭
14.
...shuts down any power source within its blast radius.
...能使爆炸半径内的一切动力源,失去作用
15.
Determination of transitional fillet radius for hydroformed workpiece under wall thickness constraint
以壁厚约束的内高压胀形件过渡圆角半径确定
16.
Application of Radius Compensation of Parts with Inner Concave Surface in NC Lathe
数控车中带内凹表面零件的半径补偿应用
17.
double radius button head snap
双半径半圆头铆钉窝子
18.
Radii of sphere surfaces
GB/T6403.1-1986球面半径