1.
7 Permanent weld backing bars, consumable inserts and nonconsumable insert rings are not permitted without prior written approval from SECCO.
事先没有赛科公司的书面批准，不允许有永久焊接的支撑杆、熔化性嵌条和不可熔嵌环。
2.
Coal Ash Low Temperature Molten Matrix Formation Characteristics under Fluidized Gasification;
流化床气化条件下煤灰低熔点共融物形成特性
3.
Experiments on the Fusibility of Coals Ash under Pressurized Fluidized Bed Gasification;
加压流化床气化条件下煤灰熔融特性的实验研究
4.
Investigation of Superheating Kinetics of Nanoparticle Pb Embedded in Al Matrix;
Al基体中Pb纳米镶嵌粒子过热熔化动力学初探
5.
The melting consistency of two cores is influenced by electrode type, welding current etc.
研究表明,双电极焊条两焊芯熔化的一致性受焊条类型、接电流等因素的影响。
6.
Each stripe took the same amount of time to melt.
每一条都花相同的时间才熔化。
7.
Investigation on Properties of Deposited Metals by Shielded Metal Arc Welding Process D172;
D172焊条电弧堆焊熔敷金属性能研究
8.
Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone
CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究
9.
Study on Micromultiphasal Structural Dynamic Viscoelasticity and Mechanical Performance of SIS/SBS Block Hot-melt Pressure-sensitive Adhesives;
SIS/SBS嵌段型热熔压敏胶的微多相结构动态粘弹性及力学性能研究
10.
Study on Ductility Dip Cracking Sensitivity for Incone1690 Electrode Filler Metal;
Incone1690焊条熔敷金属高温低塑性裂纹敏感性研究
11.
Weaker Condition of EPI Convergence--EPI Nesting;
epi收敛条件的弱化——epi嵌套
12.
If each stripe melted in about an hour, about three hours would have passed when three stripes melted.
如果每一条熔化的时间大约为一小时，那么熔化三条，就过了大约三小时。
13.
Molten Salt Synthesis and Electrochemical Properties of Manganese Dioxide
熔盐法制备二氧化锰及其电化学性能
14.
Reaserch on gasification of anthracite coal catalyzed by molten salts
无烟煤熔融盐催化气化反应特性研究
15.
silver nitrate fused into sticks and formerly used as a caustic.
熔化成条状的硝酸银，以前用作一种腐蚀剂。
16.
Add metal from the rod by dipping the end into the pool so that it melts and makes up the vee.
将焊条一端浸入池内熔化，填满V形坡口。
17.
Design of Dust Cleaning Equipment of Twin Deposition Electrode Arc Welding;
双熔敷极焊条电弧焊除尘净化设备设计
18.
Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal
氧化铈对低合金钢焊条熔敷金属的影响