1.
Install pitman shaft and side cover in the housing.
在机座中安装转向摇臂轴和侧盖。
2.
Precise 3D Modeling of Design of Arm Shaft;
转向摇臂轴的精确三维造型设计应用
3.
Optimization Design of Double Front Axle Steering Swing Arm Mechanism in Heavy-duty Trucks
重卡双前桥转向摇臂机构的优化设计
4.
Remove the cotter pin and nut from the drag link at the pitman arm.
从转向拉杆上拆下转向摇臂处的开口销和螺母。
5.
"Essentially, the steering gear consists of two parts, a worm on the end of the steering shaft and a pitmanarm shaft on which there is a gear sector, toothed roller, or stud."
转向器基本上由两部分组成:装在转向轴末端的蜗杆和转向摇臂轴。
6.
"This movement causes the pitman arm, attached to the sector, to swing to the right or left. This action, in turn, pushes or pulls on the tie rods attached to the pitman arm."
这一运动又依次推动或拉动与转向摇臂相连的转向直拉杆。
7.
The optimization models of steering trapezium system and portrait transmission are built.
建立了转向梯形机构和转向摇臂机构的优化模型；
8.
Many types of steering linkage have been made to connect between the steering knuckles of the front wheels and the pitman arm of the steering gear.
很多类型的转向连杆装置都是用来连接前轮转向节和转向器的转向摇臂的。
9.
"The gear sector, toothed roller, or stud meshes with the worm."
转向摇臂轴上装有扇形齿轮、带齿滚柱或指销,用以和蜗杆啮合。
10.
The pitman arm swings from one side to the other (or forward and Backward on some cars)as the steering wheel is turned.
转动方向盘时,转向摇臂从一侧摆动到另一侧(在某些汽车上是前后摆动)。
11.
A gear sector is meshed with the worm gear; rotation of the worm gear causes the gear sector to rotate.
蜗杆齿带动齿扇转动,齿扇与蜗杆齿啮合,这使的与齿扇相连接的转向摇臂左右摆动。
12.
steering clutch release rocking lever
转向离合器开关摇臂杆
13.
Analysis of Climbing Obstacle Trafficability on the Six-Wheeled Rocker-Bogie Lunar Rover
摇臂-转向架式月球探测车越障通过性分析
14.
slide block universal radial drilling machine
滑座式万向摇臂钻床
15.
Analysis of Obstacle Capability of Lunar Rover with the Rocker-bogie Structure
基于摇臂-转向架结构月球探测车的越障能力分析
16.
A method for kinematics modeling of rock-er--bogie mode lunar rover with 6 wheels is described inthis paper.
给出了六轮摇臂—转向架式月球探测车的运动学建模方法。
17.
"There are two general types of power steering. One type is self-contained, with all hydraulic pressure applied to the pitman arm shaft."
动力转向一般具有两种类型。一种是独立的,所有的液压力都施加在摇臂轴上。
18.
side bearing arch
中摇枕(三轴转向架)