1.
manual valve positioner
手动阀定位机构手动阀反馈装置
2.
Air filtering pressure reducing valve, solenoid valve, valve location feedback device, valve gate locator, quick exhaust valce.
空气过滤器减压阀，电磁阀，阀位反馈装置，阀门定位器,快速排气阀。
3.
Research on Control System of the Intellective Valve Positioner on Regulating Valve;
调节阀智能阀门定位器控制系统的研制
4.
The valve stem with its grooved rings and positioning sleeve indicates the throttled position of the valve.
阀杆及其沟槽环和定位套筒显示阀门的节流位置。
5.
Throttle Position Sensor Mounting Screws
节气阀位置感知器固定螺丝
6.
Solenoid Switch Valve Latched in TCC Position
电磁螺线管开关阀门固定在ＴＣＣ位置
7.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
8.
The PCV valve sticks in the open, maximum-flow position.
把PCV阀固定在开启位置即最大流量位置。
9.
Position seating eliminates stress and potential binding due to thermal expansion of the stem.
定位阀座消除了由于阀杆的热膨胀导致的应力和可能的弯曲。
10.
Place the cover onto the spring with the internal guide on the cover positioned inside the end coil.
将阀盖及阀盖上的内部引导放置在弹簧上，定位内部端线圈。
11.
One-Piece Thru Shaft: Ensures dependability and positive disc positioning.
一体化贯穿轴:确保阀门的强度、可靠性合阀板的精确定位。
12.
Self-tuning of PID Parameters on Intelligent Valve Positioner
智能阀门定位器PID参数自整定及控制算法设计
13.
The latch plate permits the valve to be locked in any of the10 positions on DIT handles or in any position on IOL handles.
DIT手柄上的插销板使得阀门能够在十个位置上锁定；而IOL手柄则可以在任何位置锁定阀门。
14.
Provides adjustable alignment, eliminates body wall penetrations.
具有可调整定位功能，避免阀体壳壁被穿透。
15.
The valve may be padlocked in full open or full closed position.
可以把阀门锁定在完全开启或完全关闭的位置。
16.
Specifies the fill threshold in units of 32 bytes.
用于指定填充阀值的大小，以32字节为一个单位。
17.
The Realization of Control System of the Intellective Valve Positioner Based on Industrial Ethernet
基于工业以太网的智能阀门定位器控制系统
18.
The Study of Positioning and Cushioning Controlled by Proportional System in the Medical Traction Bed;
医用牵引床比例阀控缸缓冲与定位的研究