说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 旋臂吊车
1.
electricwall type slewing crane
电动墙式旋臂吊车、电动壁吊
2.
The truck crane( gantry crane, tower crane, mobile slewing crane, bridge crane, crawler crane) can lift a weight of15 tons.
这台汽车起重机(门吊、式吊、臂汽车吊、式吊、带式起重机)吊起15吨的重物。
3.
Day and night the giant arms of cranes move about,loading and unloading cargo.
吊车的巨臂日夜移动,装货卸货。
4.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
5.
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
6.
Position the lower suspension arm at the axle bracket and rear bracket.
把下端悬吊臂放在车轴支架和后侧支架上。
7.
Her right arm was in a sling.
她的右手臂用吊带吊着。
8.
gantry crane with slewing man-trolley
带司机小车的旋臂龙门起重机
9.
The Finite Element Analysis and Research for Its Intensity and Toughness of Lift Arm and Bracket of Heavy Wrecker;
重型清障车吊臂和托架强度刚度的有限元分析研究
10.
"In the second type, the coil spring is located between the upper and lower control arms, and the lower control arm has two points of attachment to the car frame. "
二,螺旋弹簧安装在上、下控制臂之间,下控制臂有两处与车架相连。
11.
"There are three types of coil-spring front suspension. In one, the coil spring is located between the upper and lower control arms, and the lower control arm has one point of attachment to the car frame."
有三种螺旋弹簧前悬挂结构:一,螺旋弹簧安装在上、下控制臂之间,下控制臂的一端与车架相连;
12.
pylon diagonal drag brace
吊臂架交叉阻力支撑条
13.
32-metre 4-arm placing boom
32米4臂浇灌吊杆
14.
Remove rear lower suspension arm bolts.
拆卸后下端悬吊臂螺栓。
15.
Only use your risers to get out of a spin if your brakes become redundant.
假如你的煞车失灵了,只好使用你的吊组绳来脱离旋转。
16.
lifts and moves heavy objects; lifting tackle is suspended from a pivoted boom that rotates around a vertical axis.
提起并移动重物;起重滑车悬挂在围绕垂直轴旋转的转动吊杆上面。
17.
Underbrace jib crane with adjustable hoist. Swing range can be shown.
带有可调节绞车的下支撑悬臂起重机。可显示旋转范围。
18.
spiral contrapper knitting machine
螺旋形花纹吊线织袜机