1.
By means of our some knowhow, our plano-convex blanks have good concentricity and consistency at surface processing.
平凸：独创的平凸加工技术使我们的传感器晶片凸面同心度更好，表面质量一致性更好。
2.
Relation between Geometric Convex Function, Square Convex Function and Convex Function;
几何凸函数平方凸函数与凸函数的关系
3.
0 - Flat;1 - Raised;2 - Inset;3 - Raised Light;4 - Inset Light
-平面；1-凸起；2-凹入；3-凸起光；4-凹入光
4.
Equivalent Characterizations of Average Strong Convexity in Locally Convex Spaces
局部凸空间的平均强凸性的等价刻画
5.
On level sets of E-convex function and E-quasiconvex function
有关E-凸函数和E-拟凸函数的水平集
6.
Schur-Convexity and Schur-Geometric Concavity of Lehme Means
Lehme平均的Schur凸性和Schur几何凸性
7.
Metal sheets that have raised sections will work very well.
凹凸不平的金属片最好。
8.
straight and bellied-jaw crusher
平-凸腭板式破碎机
9.
the inequalities of the ground
地面的高低 [凹凸] 不平
10.
The horizontally projecting edge of a stair tread.
凸出楼梯踏板水平突沿
11.
Schur-convexity of the Generalized Heronian Mean;
广义Heron平均的Schur凸性
12.
Average Uniform Convexity and Average Uniform Smoothness in Locally Convex Spaces
局部凸空间的平均一致凸性与平均一致光滑性
13.
One of the parallel ribs or ridges in the surface of a fabric such as corduroy.
凸条织物表面的平行凸纹或隆起，如灯蕊绒斜纹
14.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.6MPa (16 bar)
GB/T9116.5-1988PN1.6MPa(16bar)凸面带颈平焊钢制管法兰
15.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 10.0MPa (100 bar)
GB/T9116.10-1988PN10.0MPa(100bar)凸面带颈平焊钢制管法兰
16.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.0MPa (20 bar)
GB/T9116.8-1988PN2.0MPa(20bar)凸面带颈平焊钢制管法兰
17.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.5MPa (25 bar)
GB/T9116.6-1988PN2.5MPa(25bar)凸面带颈平焊钢制管法兰
18.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.0MPa (10 bar)
GB/T9116.4-1988PN1.0MPa(10bar)凸面带颈平焊钢制管法兰