1.
Faults: Short, prancing or choppy gait, lumbering or rolling gait; crossing or crabbing.
缺点（不合格）：步伐过短，跳跃或者起伏，笨拙或者摇摆的步态；横向行进或斜行。
2.
Entry clamp with longitudinal and cross traverse.
可纵向、横向运行的进口夹钳
3.
Finally, the fighter's directional-lateral flying qualities were caclulated and analyzed.
最后，对某战斗机的横航向模态特性进行了计算。
4.
animal ivory worked beyond cleaning, simple sawing, cutting (crosswise or legnthwise) and rough planing
动物牙,不仅仅进行清洗,且简单锯切（横向地或纵向地）和粗略刨光
5.
sideways movement across sth,esp(in mountaineering)across a rock face,etc;place where this is necessary to continue the ascent or descent
（横越某物的）侧向运动（尤指爬山时的）;需侧向行进之处.
6.
cross travel of horizontal spindle box
水平主轴座横向行程
7.
Horizontal combination
横向合并,同行业合并
8.
No damage in the wall panel and door after hit by 75kg sandbag.
以75公斤重沙袋对板壁及门进行横向撞击试验，没有损坏。
9.
On the other hand, the HFNM is in its own right useful in single-event analysis.
另一方面,在单事件分析中,使用横向阶乘矩进行计算是有意义的。
10.
(3) The predictive control of titling passenger car is studied with the predictive lateral acceleration.
(3)利用预测横向加速度进行摆式客车的预测控制研究。
11.
STUDY ON THE TRANSVERSE RESPONSE OF HIGH-g ACCELEROMETER BY A COMPARISON METHOD OF WAVEFORM
利用波形比较法进行高量程加速度传感器横向响应的测试研究
12.
Research on Cross-Industry Entrance and Horizontal Merger of Communication Industry under Network Convergence
网络融合下的产业交叉进入及企业横向兼并行为研究
13.
Repeat the maneuver but this time start flying sideways to the left.
向左侧横向飞行，重覆执行上述的步骤。
14.
After the process research of case materials , we gives a preparative study and synthetic analysis through macro view .
我们在对个案材料进行过程研究之后又进行了宏观上的综合分析和横向的比较研究。
15.
bone [excl. whalebone, worked beyond cleaning, simple sawing, cutting (crosswise or lengthwise), rough planning, flattening or bleaching]
骨[不包括鲸骨,不仅进行清洗简单锯切（横向地或纵向地）,且粗略刨光、压平或漂白]
16.
The difference in the horizontal and vertical factorial moments is compared and studied using Monte-Carlo simulation.
用蒙特-卡洛模拟方法对纵向阶乘矩和横向阶乘矩进行了比较和研究。
17.
Three key coupling factors, longitudinal、transverse and angular misalignments between two optical fibers are analyzed.
对两根光纤的纵向距离、横向偏移和角度倾斜三个耦合效率的影响因子进行了仿真分析。
18.
Automatic horizontal-feeding and rapid motion can be obtained by the slide carriage of the machine.
机床滑座能横向自动进给和快速移动。