1.
Position by aligning the slotted line to the hem or fold line marking. Fuse.
以底边的虚线或直折线定位粘双面粘合衬。
2.
Fold along the slotted line and press into position. Hems can then be tacked into lace by fusing small squares of fusible webs.
沿虚线折叠并熨烫,将底边固定。底边可用小方块状双面粘合衬固定。
3.
A Study on Compatibility of Light-Worsted Wool Fabric with Double-Point Fusible Interlining;
轻薄毛精纺面料与双点粘合衬的配伍性研究
4.
Discussion on Detection Method about Quality of Double-point Non-woven Fusible Interlining
双点无纺粘合衬的质量检测方法探讨
5.
Remove the darts and seam allowance from heavier interfacing before fusing, in order to reduce bulk. Fuse the interfacing to fabric.
为了减少臃肿,在粘合前把厚粘合衬的省道与缝份去掉,然后将衬布粘合到面料上。
6.
Using interfacing as for the jacket front. Cut out with a pinking curved edge to avoid creating a ridge once it is fused to the fabric. Fuse to the fabric.
为了避免衬布与面料粘合后产生皱褶,将衬布剪成锯齿形曲边,然后粘合到面料。
7.
Present researches on fusible interlinings and drape simulation of fused panel
面料与粘合衬的配伍性与三维建模的研究现状
8.
Influnce and Predictional Study on Comfort of Fusing Clothing Fabrie with Fusible Interlining;
面料与粘合衬粘合压烫对服装复合材料热湿舒适性能的影响及预测研究
9.
Carefully place the fusible piece on top, matching it to the jacket edges. Cover with a damp cloth and fuse in place.
仔细地把粘合衬放在上面,与门襟止口对齐。用一块湿布覆盖并定位粘合。
10.
If you prefer speed tailoring, cut the front interfacings from a fusible interfacing. Trim away the darts, and fuse the interfacing in place.
若喜欢快速缝制,前衣片衬布可用粘合裁。修剪掉省道,衬布定位粘合。
11.
XPS characterization of NEPE propellant/line bondline
NEPE推进剂/衬层粘接界面XPS表征
12.
It has two elements: an interfacing for the entire front; and a shoulder piece that extends to the tip of the bust. Either or both can be cut from sewn-in fusible interfacings
有两种方法：全衬；肩衬延伸到胸点。两种做法都可用于预缝衬或粘合。
13.
The Analysis of In-Plane Mechanical Properties of Multilared Biaxal Weft-Knitted Fabric Reinforced Composite;
纬编双轴向多层衬纱织物增强复合材料面内力学性能研究
14.
compatible shrinkage
相容收缩（指粘合织物的面布和底布或服装的面料、衬料以及辅料具有相等的收缩程度）
15.
Stick the cushions of printer, photostat and other home electric equipment.
(1)打印机、印机和家用电器衬垫的粘合。
16.
testing methods for adhesion of thin films on glass substrate
玻璃衬底薄膜粘合性试验方法
17.
testing methods for the adhesion of silica coating to the glass substrate
玻璃衬底硅膜粘合性试验方法
18.
Cut the interfacings and stay from sew-in interfacing. Trim away the seam allowance at the shoulder and dart taking up area. Fuse of tack the interfacings to the underlinings.
用预缝衬裁出衬布与撑条,修剪掉肩缝处缝份与省道部分,然后把衬布粘合或粗缝到衬里上。