1.
Steel plate with through-thickness characteristics
GB/T5313-1985厚度方向性能钢板
2.
Considerable residual stresses exist in the normal direction.
在其厚度方向存在着可观的残余应力。
3.
One dimensional overpotential distribution equation along the direction of the bed thickness is formulated.
建立了固定床内超电位沿床层厚度方向的一维分布方程。
4.
Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding
搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究
5.
In the analysis, the material properties of the functionally graded Timoshenko beam are assumed to vary continuously through the thickness of the beam, according to a power law distribution of the volume fraction of the constituents.
其中，功能梯度材料梁的材料性质采用了沿厚度方向按照幂函数形式连续变化的形式。
6.
Calculation of Transversal Slab Thickness During Plate Rolling
中厚板轧制过程横向厚度的计算方法
7.
In- situ hollow floor hollow cylinder transverse direction equivalent thickness simplified numerical solution
现浇空心楼板横筒方向等效厚度简化数值解法
8.
The relation between outcrop width and thickness depends on the dip of the bed, the slope of the ground, and the direction of traverse.
露头宽度与厚度的关系取决于岩层的产状、地面坡度和路线方向。
9.
Temperature Distribution Simulation of Heave Plate along the Direction of the Width in the Rolling Process
轧制过程中宽厚板沿宽度方向温度分布模拟研究
10.
Uneven temperature already existed in plate lengthwise direction before cooling, and the uneven temperature tendency was aggravated after it cooled.
中厚板控制冷却时钢板的长度方向温度不均,冷却过程加剧了钢板纵向的温度不均匀性。
11.
Test method of plating and coating thickness by beta backscattering for printed boards
GB/T4677.8-1984印制板镀涂覆层厚度测试方法β反向散射法
12.
The Influence of Thickness and Laying Methods of Veneer on the Performance of Com ply
单板的厚度和配置方式对复合定向刨花板性能的影响
13.
STUDY ON STATIC STRENGTH OF RHS T-JOINTS WITH REINFORCED CHORD THICKNESS SUBJECTED TO AXIAL PRESS LOAD
轴向压力作用下主管壁加厚的T型方钢管节点静力强度研究
14.
Test method for thickness and total thickness variation of silicon slices
GB/T6618-1995硅片厚度和总厚度变化测试方法
15.
Regulating hand wheels for pressure,tablet thickness,stuffing and speed and all kinds of display lamps,rating plate and buttons are all arranged at the same direction for easy observation and opeation.
压力、片厚、充填、速度调节手轮，各种指示灯、表牌、按钮均设在同一方向，观察、操作方便。
16.
Research on the Orientation and Stress of ZnO Films with Different Thickness
不同厚度ZnO薄膜取向和应力的研究
17.
The wall was in some places thicker than it was high.
这面墙有的地方的厚度大于它的高度。
18.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程