1.
An error occurred while trying to save the changes to the profile. The total size of the attributes is more than the maximum of 4096 bytes.
试图保存对配置文件的改动时出错。总尺寸超过 4096 字节。
2.
full size drawing
原尺寸图，实物尺寸图
3.
foot in the door technique
得寸进尺法得寸进尺法
4.
At first a comprehensive and short review on the characteristics for size growth-rate of crystals is presented.
首先对微晶粒尺寸增长速率的表征进行总结.
5.
" Rolling bearings--Thrust bearings--Boundary dimensions,general plan"
GB/T273.2-1998滚动轴承推力轴承外形尺寸总方案
6.
Smaller clothing sizes always sell out quickly at clearance sales.
清仓大甩卖时，较小尺寸的衣服总是很快就卖光。
7.
Generic specification for optical fibres--Part 2: Measuring methods for dimensions
GB/T15972.2-1998光纤总规范第2部分:尺寸参数试验方法
8.
Research on Driving Pinion of Automotive Assembly Technique Based on Dynamic Dimensional Chain;
基于动态尺寸链的汽车主锥总成装配技术研究
9.
The measurements are 108 by 48 by 3 inches.
尺寸是高108英寸，宽48英寸，厚3英寸。
10.
A size of paper, usually18?3 inches or17阶22 inches.
中号尺寸纸张的尺寸，通常为18223英寸或17222英寸
11.
Trimmed size: The size of a printed piece after trimming. Also referred to as Finished size.
裁切尺寸:印刷品裁边后的尺寸。亦称为完成尺寸。
12.
Standard linear dimensions
GB/T2822-1981标准尺寸
13.
Oh, it's a junior size.
噢，这个小号尺寸。
14.
Stringer cross section dimensions
纵梁断面尺寸(mm)
15.
Give him an inch and he'll take an ell.
〔谚语〕得寸进尺。
16.
Eventually closed all the screw compressor assembly drawings, plans and dimensions of all the main components map.
最终形成全封闭螺杆压缩机总装配图、形尺寸图和各主零件图。
17.
The size of each assembling sleevepiece produces as above is φ200×270mm, the total length of the assembled lance is about 2400mm.
每节组件尺寸为Φ200×270毫米,组装喷枪总长为2400毫米。
18.
To reduce to the smallest possible amount, extent, size, or degree.
减少到最低限度将其总数、范围、尺寸或程度缩减到尽可能小