1.
anti-friction bearing internal cylindrical automatic grinder
减摩轴承内圆自动磨床
2.
Stephenson's alloy
斯蒂芬逊减摩轴承合金
3.
"Ball Bearing: One of the two types of rolling, or antifriction, Bearings (the other is the roller Bearing)."
球轴承: 滚动(或减摩)轴承的一种(另一种为滚柱轴承)。
4.
The purpose of lubrication bearings is to reduce the friction.
润滑轴承是为了减少摩擦。
5.
It is to reduce friction that roller bearings are used.
正是为了减少摩擦，才使用滚珠轴承。
6.
Plain bearings-Bimetallic bushes with plastic overlay
GB/T12949-1991滑动轴承覆有减摩塑料层的双金属轴套
7.
Research on Ultrasonic Vibration Reducing Friction in Supporting Shafts;
超声振动在对轴支承中的悬浮与减摩作用研究
8.
Influence of Temperature on Friction and Wear Properties of Cu-10Sn-10Pb Anti-friction Composite Materials
铜铅轴承材料减摩耐磨性能及其温度的影响
9.
"To minimize friction, the contacting surfaces in a Bearing may be separated by a film of oil or gas, these are also sliding Bearings ."
为了减小摩擦力,轴承内的两个接触面可以用一层油膜或气膜隔开,这类轴承称作滑动轴承。
10.
The journal rubs against the bearing surface.
轴颈在轴承面上摩擦。
11.
It was not until the introduction of ball and roller bearings that friction could be greatly reduced between moving parts .
直到应用了滚珠和滚柱轴承，可动部件间的摩擦才大大地减小了。
12.
Mechanism of Acoustic Levitation and Reducing Fraction Analysis and Basic Experimental Study on the Ultrasonic Bearing
超声波轴承悬浮与减摩作用机理及基础实验研究
13.
Harrington bronze
哈林顿耐摩轴承青铜
14.
Pulley bearings are frictionless.
滑轮轴承是无摩擦的。
15.
Babbits are known as the superior bearing metal in anti-friction property,butsince their lower fatigue strength,bearing of these metals are apt to crack and spalling,whenthey serve in high load condition.
巴氏合金是减摩性最好的轴承材料,但是其疲劳强度低,在高载荷下轴瓦合金层容易开裂剥落。
16.
Do you mean the shaft will run against the bush?
你的意思是轴会与轴承套直接摩擦吗？
17.
The friction of the bearings causes them and the lubricating oil which is circulating through them to warm up.
轴承的摩擦使轴承和流通于轴承间的润滑油发热。
18.
These fluctuations can be minimized by reducing friction at the bearings of the levers and at their points of contact.
可以通过减少连杆轴承处和联接点处的摩擦来降低经纱张力的波动。