1.
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
直径公差，偏圆度及脱碳层的平均深度
2.
Diameter, Tolerance and Tensile Strength
直径，公差及拉力强度
3.
General purpose screw threads--Tolerances and fits for diameter from 1 to 355mm
GB/T197-1981普通螺纹公差与配合(直径1~355mm)
4.
reference surface diameter tolerance
基准面直径容差 -光纤的
5.
limit deviation of root circle diameter
齿根圆直径极限偏差
6.
Tolerance of Wire Diameters & Ovality
圆径及偏圆度之公差
7.
The Solution for Unacceptable LSAW Linepipe End Diameter
大口径直缝焊接钢管管端直径超差的处理方法
8.
nominal cartridge diameter of microphone
传声器极头公称直径
9.
Common screw thread deviation table
GB/T2516-1981普通螺纹偏差表(直径1~355mm)
10.
The tomato fruit varies in shape from spherical to elongate and in size from 0.6 in. (1.5 cm) across to more than 3 in. (7.5 cm) across.
西红柿果实的形状从圆球形到长圆形不等,大小差异很大,直径从1.5～7.5公分以上。
11.
The interior dimensions of silver brazing valve sockets are machined to the closest tolerances and finished smooth to promote full capillary attraction.
银钎焊的阀门套管的内部直径的机械公差和表面光滑度要求非常精确,以确保有足够的附着力。
12.
The Relation, Substitution and Implement of Radial Run-out Tolerance and Axiality Tolerance;
径向跳动公差与同轴度公差的关系、取代及实施
13.
The difference in a given firearm between the diameter of the projectile fired and the diameter of the bore of the firearm.
游隙某一特定火器枪弹的直径与火器镗孔的直径之间的差异
14.
It has a circumference of about forty thousand kilometers, a polar diameter of twelve thousand seven hundred and fourteen kilometers, and an equatorial diameter of twelve thousand seven hundred and fifty-six kilometers.
它的周长约为40000公里，南北极直径约12714公里，赤道直径为12756公里。
15.
The diameters of stars, unlike their masses, have an enormous range.
恒星的直径不同于它们的质量，相差很大。
16.
This last error depends on the wire spacing and diameter.
后者引起的误差取决于导线的距离和直径。
17.
Numerical Iteration Method for Modifying Measurement Error of Diameters of Steel Ball or Ring
套圈和钢球直径测量误差修正的数值迭代法
18.
Research and Error Analysis on the Intelligent On-line Measurement of the Large-Diameter;
智能化在线大直径测量技术研究与误差分析