1.
Graver: V-shaped steel cutting tool used by engravers.Also called burin.
雕刻刀:雕刻铜版用的槽形钢刀。
2.
Influences of Anchor System on Web Stress of Multi-Span Continuous Steel Tub-Girders During Hauling Construction
拖拉施工锚固系统对多跨连续槽形钢梁腹板局部受力的影响
3.
Non-Linear Behaviour and Load-Carrying Capacity of CFRP-Strengthened Lipped Channel Steel Columns
碳纤维增强卷边槽形钢柱的非线性性能和承载力
4.
Analysis for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending;
冷弯薄壁C形槽钢受弯畸变屈曲分析
5.
" Hot-rolled channel steel-Dimensions, shape, weight and tolerances"
GB/T707-1988热轧槽钢尺寸、外形、重量及允许偏差
6.
Experimental Study on Distortional Buckling of Cold-formed C-type Channel Section;
冷弯薄壁C形槽钢畸变屈曲的试验研究
7.
Buckling of Composite Columns of Lipped-Channel and Hat Sections with Web Stiffener
带加劲肋的帽形卷边槽钢组合柱的屈曲
8.
Advantage of Using Arched-type Sheet in Items of Altering from Level to Slope Roof
薄钢拱形槽板用于“平改坡”项目上的优势
9.
The "pony" type of mixer is also a steel fabricated cylindrical tank and plain internally.
“小筒”型和膏机也是一种钢制的圆形的同筒形槽而内部是平的。
10.
7 mm thickness steel materials slotted knife, serrated blade, and ensure the quality of life and grooving.
开槽刀厚度7毫米合金钢材料，锯齿形刀刃，保证使用寿命和开槽质量。
11.
Thin, circular, steel bands fit into grooves around the piston to seal the bottom of the combustion chamber.
把薄的，圆形的，钢圈放进活塞周围的凹槽以密封燃烧室的底部。
12.
a steel lever with one end formed into a ripping chisel and the other a gooseneck with a claw for pulling nails.
一头形成细长槽另一头有抓钉子的雁颈的钢杠杆。
13.
They are made up of high tensile wires and are normally vertical. The deck is usually orthotropic with stiffened steel plateribs or troughs, floor beams, etc.
桥面一般是由加劲钢板肋或槽形板，桥面梁等组成的正交异性板。
14.
Experimental and Theoretical Study on Distortional Buckling of Cold-Formed Thin Wall Steel Lipped Channel Columns under Compression;
卷边槽形冷弯薄壁型钢轴压柱畸变屈曲的试验和理论研究
15.
Experimental and Theoretical Study on Distortional Buckling of High Strength Cold-formed Steel Lipped Channel Columns under Axial Compression;
高强冷弯薄壁型钢卷边槽形截面轴压柱畸变屈曲试验与理论研究
16.
Local and Distortional Buckling Analysis of Cold-Formed Lipped-Channel with V-Stiffened Web under Axial Compression Force;
腹板V形加劲的冷弯卷边槽钢轴压下局部和畸变屈曲分析
17.
Experimental Study and Finite-element Analysis on Cold-formed C-type Channel Column with Connecting Bars between Lips;
卷边加连杆的冷弯薄壁C形槽钢受压性能试验研究与有限元分析
18.
Biomechanical Experimental Research on the Compression Plate of Gear Contact Plate-band and Channel Type for Femoral Fractures;
齿接触板-带式槽形加压钢板固定股骨骨折的生物力学实验研究