1.
Face-to-Face dimensions of standard raised face flanged end valves are shown on catalog pages covering dimensions for each valve.
标准凸面法兰端口阀门的面对面尺寸在每个阀门的介绍页面中列出。
2.
Loose hubbed cast iron pipe flanges for lapped pipe end
GB/T17241.5-1998管端翻边带颈松套铸铁管法兰
3.
Butt-welding ends for steel pipe flanges
GB/T9124-1988钢制管法兰对焊端部
4.
At the head of the sheet was written: @France, Alsace, France, Alsace.
这张纸的上端写着：“法兰西，阿尔萨斯，法兰西，阿尔萨斯。”
5.
End Connections– choice of flanged, threaded or socket weld ends.
(13) 连接端口-可提供法兰、纹或焊接连接端口供用户选择。
6.
End Connections– choice of flanged or socket ends for piping flexibility.
(3) 连接端口-根据连接管道的情况，可选择法兰或承插焊连接端口。
7.
End Connections ? choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
8.
The French government has taken steps against suspected Islamic extremists.
法国政府已经采取行动怀疑伊斯兰的极端分子。
9.
Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
钢管和管件有两种标准端部型式，即：法兰和丝扣。
10.
THE HORIZONTAL LIQUID SUMP SHALL HAVE FLANGED HEADS ON BOTH ENDS.
水平的（卧式）排污箱必须有两端带法兰的封头。
11.
Breaking Reason and Solution of the Connecting Bolts Used in the Ball Mill End Cover
球磨机端盖法兰连接螺栓的断裂原因及其解决
12.
Mold Design of Composite Cone with Extrorse Flange in Its Little End
小端外翻法兰复合材料锥壳的模具设计
13.
Turn the locking bolt so that it is fixed on the bake cover or the flange plate.
安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。
14.
Turn the hollow bolt so that it is fixed on the bake cover or the flange plate.
安装后必须旋出空心螺栓锁紧在电机后端盖或法兰盘上。
15.
See' Technical Data" section for end flange dimensions and drilling templates.
参阅《工程技术资料》章节，了解连接端口法兰尺寸和钻孔模板。
16.
Cultural Economical Age in Its Inception--The Theory of "Cultural Industry"of Frankfort School;
论初现端倪的文化经济时代——兼论法兰克福学派“文化工业”论
17.
Place ice in tumbler; pour in brandy, lime juice and cordial. Top with soda water.
方法：将冰放入平底玻璃杯中，滤入白兰地、柠檬汁和饮料，上端倒入苏达水。
18.
Apply silicon sealer/lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end.
将硅密封/润滑剂施加在法兰组件垫圈的内径和外径上，将垫圈压在阀体端口上。