1.
Inspect the front brake pads and rear brake linings.
检查前刹车垫和后刹车衬。
2.
Numerical Experiments on Transient Heat Conduction in Tunnel Kiln Products and Lining Bricks in Kiln Car
隧道窑制品和窑车衬砖瞬态导热数值实验研究
3.
The Research on the Forging Process of a Pad Part Based on Numerical Simulation;
基于数值模拟的火车衬板锻造工艺研究
4.
Brake linings for automobiles
GB5763-1998汽车用制动器衬片
5.
REAR HEADLINER TRIM MOLDING
后车顶蓬内衬装饰嵌条
6.
sintered brake lining for autos
粉末冶金汽车制动衬片
7.
Packing: Transported by the tank with lined rubber.
产品包装：用内衬橡胶的槽车装运。
8.
Remove the speaker grille from the headliner.
从车顶衬拆卸扬声器风栅。
9.
Bushing Retainer To Axle Attaching Bolts
衬套扣环与车轴接合螺栓
10.
Research and Development of Composite Sheet Prepared by Waste Auto Ceiling Polypropylene;
回收汽车顶衬PP废料进行板材的研制
11.
Research and Improvement Tribology Properties of Locomotive Center Plate Lining;
机车车辆用心盘衬垫摩擦学性能的研究与改善
12.
With rear door closed and front door open, remove door hinge pin and bushing with a punch.
通过关闭后车门和打开前车门，用钻孔器拆卸车门铰链销和衬套。
13.
Production of automobile disk-type block,shoe block,facing and motorbike brake block.
生产各类高品质的汽车盘式片、鼓式片、蹄块、衬片、摩托车刹车片。
14.
To remove a headliner, all of the upper trim moldings must be removed from the perimeter of the headliner along with (as applicable):
为拆去车顶蓬内衬，所有上装饰嵌条必须从车顶蓬内衬周围拆去，沿着（可适用的）：
15.
Mechanical connections of articulated bus Ball socket
GB/T7726.4-1998铰接式客车机械连接装置球形衬套
16.
Install liftgate opening (headliner) upper trim molding.
安装升降闸门开口（车顶蓬内衬）上装饰嵌条。
17.
Remove liftgate opening (headliner) upper trim molding.
拆去升降闸门开口（车顶蓬内衬）上装饰嵌条。
18.
Position dome/reading lamp housing at headliner cavity.
将圆顶照明/阅读灯外壳定位于车顶蓬内衬槽中。