1.
Influence of Temperature and Relative Humidity on Aging of the Atmospheric Plasma Treatment Effect on Ultrahigh Modulus Polyethylene Fibers;
温湿度对等离子体处理后超高模量聚乙烯老化的影响
2.
Effect of the glycerol coating interlayer on UHMPE fibers treated by atmospheric pressure plasma jet
甘油涂层对常压等离子体射流处理超高模量聚乙烯的影响研究
3.
Influence of Distilled Water, Sodium Hydroxide, Ammonia and Acetic Acid on Atmospheric Pressure Plasma Jet Treatment of Ultrahigh-modulus Polyethylene Fibers
水膜、氢氧化钠、氨水和冰醋酸对超高模量聚乙烯纤维常压等离子处理效果的影响
4.
Influence of Sodium Hydroxide,Ammonia and Acetic Acid on Atmospheric Pressure Plasma Jet Treatment of Ultrahigh-modulus Polyethylene Fibers
氢氧化钠、氨水和冰醋酸对超高模量聚乙烯常压等离子处理效果的影响
5.
ultra high strength high-modulus fibre
超高强度高模量纤维
6.
Design of High-precision Ultrashort Time Interval Measurement Module
高精度超短时间间隔测量模块的设计
7.
Numerical Simulation Study of the UHMWPE Gas-assisted Extrusion;
超高分子量聚乙烯气辅挤出的数值模拟分析
8.
Rigid-flex Coupled Modeling and Simulation of a Super-light Antiaircraft Machine Gun
超轻量化高射机枪刚柔耦合建模和仿真
9.
skillful and in high quality
技术精湛，质量高超
10.
Study on HTS modules of HTS current leads for ITER
ITER高温超导电流引线超导模件的研究
11.
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、验测量和数值模拟,研究高超声速粘性相互作用对实验段自由流静压测量的影响。
12.
Construction technology of slip-form and climbing shuttering method on super high building
超高层建筑滑模法与爬模法施工技术
13.
Four major failure modes for high arch dams, namely destabilization dam lost stability failure, shearing-slipping failure, excess cracking and man-caused destruction, are presented by means of failure tree analysis.
利用故障树分析法得出了高拱坝具有失稳溃坝、剪滑垮坝、超量开裂及毁坝等4种主要失效模式。
14.
Study on the Extrusion Moulding of Ultrahigh Molecular Weight Polyethylene under Ultrasonic Irradiance;
超高分子量聚乙烯的超声熔融挤出成型研究
15.
Observational constraints on varying dark energy modelwith Ia supernova;
Ia超新星对变化暗能量模型的限制
16.
2005 with Enemy at Gate: Bout beyond the Scale of Supermarkets;
2005兵临城下:超市规模之外的较量
17.
A Model for Predicting the Total Oxygen of Steel in the Process of RH Treatment
RH处理超低碳钢中总氧含量预报模型
18.
Study on Extruding Ultrahigh Molecular Polyethylene/Polypropylene Assisted by Ultrasonic/Supercritical CO_2
超声波/超临界二氧化碳辅助挤出超高分子量聚乙烯/聚丙烯的研究