1.
A CAD / CAE Integrated Design to Fuselage Main Frame
某承力密封框的CAD/CAE集成设计
2.
The structural strength and flexural rigidity of the fuselage main frame are computed and verified by CAE system software and the results are analyzed.
应用CAE系统软件计算承力密封框的刚度和强度,并分析了计算结果。
3.
The door gasket for freight containers
GB/T15846-1995集装箱门框密封条
4.
All junctions of floor, wall and ceilings shall be sealed and preferably coved. Junctions of window and door frames to walls shall be sealed.
地面、壁和天花板的接缝必须密封，最好做成圆角。门窗框架与墙壁的连接处也应该密封。
5.
A strip of material, usually wood, with one molded edge placed flush against the inner part of a door or window frame.
密封条一片材料（常为木料），磨制过的一边严密地置于门框、窗框内，使门窗打不开
6.
pressurizing window
密封封口(电缆), 气密口
7.
weatherstripping,thresholds & seals
密封条，门槛及密封胶
8.
a watertight compartment, joint, seal
水密室、 水密接合、水密封.
9.
interstage gland
级间密封，级间汽封
10.
To coat, pack, or seal with lute.
用封泥盖、包或密封
11.
tighten up
密封, 拉紧, 拧紧
12.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式：一为填料密封；一为O型密封环密封。
13.
oil pressure test for tightness
油密试验油压密封试验
14.
Cement type is sealed with special non flame cement in the ceramic package.
水泥型电阻是把绕线电阻体放入瓷器框内，用特殊不燃性耐热水泥充填密封而成。
15.
Locate your 10-digit product key, on the yellow sticker on the back of your CD case, and type it in the space below.
在光盘封套背面的黄色不干胶标签上找到 10 位产品密钥，并将其输入到下列框中。
16.
Closing Push the sash to the frame and turn down the handle the door closed tightly like swing doors.
锁紧将滑动门扇推向门框,转动把手既可将门轻松锁紧.与平开门具有同等的高密封性能.
17.
joint gasket- or packing- type, of laminated metal foil
层压金属箔密封或填密封式接合衬垫
18.
the seal of the air-balancing cylinder adopts multi-stage seal;
气平衡缸密封部位采用多级密封装置 ;