1.
STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化铝陶瓷钎焊工艺与接头强度的研究
2.
Technical Study on Brazing of Aluminia Ceramic to Kovar Alloy;
Al_2O_3陶瓷与Kovar合金钎焊工艺研究
3.
Study on Brazing Process and Its Mechanism of Ti_2AlC Ceramic to Copper
Ti_2AlC陶瓷与铜钎焊工艺及机理研究
4.
Technical and Mechanism Study on Brazing of Wear-Resistant Ceramic Lining
耐磨陶瓷衬板的钎焊工艺及机理研究
5.
Research on Process and Mechanics of Brazing Alumina to 5A05 Al Alloy
Al_2O_3陶瓷与5A05的钎焊工艺及机理研究
6.
Brazing of SiC Ceramic to GH783 Low Expansion Superalloy
SiC陶瓷与低膨胀高温合金GH783的钎焊
7.
Interfacial reaction of active brazing between Al_2O_3 ceramic and metal Ni
Al_2O_3陶瓷与金属Ni活性钎焊界面反应
8.
Active brazing of SiO_2 glass ceramic to TC4 alloy
SiO_2玻璃陶瓷与TC4钛合金的活性钎焊
9.
Experimental Investigation on Grinding Engineering Ceramics with Brazed Diamond Abrasive Wheel;
金刚石钎焊砂轮磨削工程陶瓷的试验研究
10.
The Research of Brazing of Si_3N_4 Ceramic to 42CrMo Steel Using High-Temperature Active Filler Alloy;
Si_3N_4陶瓷/42CrMo耐热钢的高温活性金属钎焊研究
11.
Mechanical properties of brazing joint of alumina ceramics to mild steel
氧化铝陶瓷与低碳钢钎焊接头的力学性能
12.
A Method of Improving Brazing Joint Strength of Plated Ceramic to Metal
提高复合电镀陶瓷与金属钎焊接头强度的方法
13.
Interface structuce of ceramic/AgCuTi/stainless steel brazed joint
陶瓷/AgCuTi/不锈钢钎焊连接界面组织与结构
14.
Microstructures of Si/SiC Ceramic and Invar Alloy Brazing Joint
Si/SiC复相陶瓷与殷钢钎焊接头组织结构研究
15.
Preparation of Ti-Si Eutectic Brazes and its Weldability to SiC
Ti-Si共晶钎料的制备及其对SiC陶瓷可焊性
16.
A Study of Brazing Process and Mechanism of Si_3N_4 Ceramic Using High-Temperature Filler Alloy;
高温钎料钎焊氮化硅陶瓷的连接工艺及机理研究
17.
The Microstructure and Properities of the Joint of Si_3N_4 Ceramics by Au-Ni-V Brazing Alloy;
Au-Ni-V钎料钎焊氮化硅陶瓷接头的组织及性能研究
18.
Microstructure and properties of Si_3N_4 ceramic joint brazed with rapidly-cooled Ag-Cu-Ti filler metals
Ag-Cu-Ti急冷钎料钎焊Si_3N_4陶瓷接头界面结构及性能