1.
Using elastic wrench moment axle in the hollow axle of motor is a good way of setting elastic buffer device of transmission system.
在截割电机空心轴内使用弹性扭矩轴是设置传动系统弹性缓冲的好办法。
2.
ELASTIC FLEXURAL-TORSIONAL BUCKLING BEHAVIOR OF PRE-TWISTED BAR UNDER AXIAL PRESSURE
初始扭转轴压杆弹性弯扭屈曲性能研究
3.
However, the elastomer becomes hard and torques increase.
但是，弹性材料会变硬，扭矩也会增加。
4.
THE IMPACT BUCKLING OF ELASTIC CYLINDER UNDER STEP TORQUE
阶跃扭矩作用下弹性圆柱壳冲击屈曲
5.
Exchange of Twisting Moment is Angle of Twint Curve for Cylinder Ipecimen of Plastic Metal with Various Diameter;
不同直径塑性金属圆轴扭转试验的扭矩——扭转角圆的相互转换
6.
Development of Elastic Couoling Torsional Vibration Test System
弹性联轴器扭转振动测试系统的研制
7.
TORSIONAL VIBRATION CHARACTERISTIC OF POWERTRAIN EQUIPPED WITH DIFFERENT ELASTIC COUPLINGS
弹性联轴器对动力传动系统扭振特性影响研究
8.
Elastic Flexural-torsional Buckling of Monosymmetric Web-tapered I-beams;
单轴对称楔形工字钢梁的弹性弯扭屈曲
9.
Elastic Flexural-torsional Buckling of Doubly Symmetric Web-tapered I-beams;
双轴对称楔形工字钢梁的弹性弯扭屈曲
10.
Study on Torsional Vibration of Bulldozer Drive System by Elastic Coupling;
采用弹性联轴节的推土机传动轴系扭转振动分析
11.
We can equip a power feeding apparatus on the right side of work table according to customer's requirements.
主轴箱采用齿轮传动，扭矩传递大，具有足够的刚性和功率传递。
12.
The FEA result illuminates that the effect of CFRP straps themselves on the cracking torque is very small.
弹性阶段有限元计算结果表明,CFRP条带本身对开裂扭矩的影响不大。
13.
The total elastic coupling is the sum of the restraints due to the bending of the tapes and the twisting of the wire.
总的弹性耦合是张力带弯曲及张力线扭转所产生的约束力矩之和。
14.
Theory and Experimental Study on the Cylindrical Elasticity Sleeve Expansion-Joints Transmission Torque;
柱形弹性套胀紧联接传递扭矩的理论及试验研究
15.
Device of shaft alternative torque and torsional vibration test of marine main engine
船舶主机轴系交变扭矩与扭振测试装置
16.
COMBINED TORSIONAL AND FLEXURAL BUCKLING OF A THIN-WALLED BAR ON ELASTIC SUPPORTS UNDER AXIAL LOADS
多弹性支承薄壁杆在轴向力作用下的弯扭联合屈曲
17.
Nominal torque series of the mechanical coupling
GB/T3507-1983机械式联轴器公称扭矩系列
18.
Find the required length of key based on the torque value of the gross shaft.
根据整根轴的扭矩值求需要的键长。