1.
Optimum Supporting Angles of Kiln Wheel to Wheel Belt--A FEM Optimization
回转窑托轮对轮带最佳支承角的有限元优化
2.
The double direction angular contact thrust ball bearings are suitable for machine tool spindles , while the single are used to support ball screws .
双向推力角接触球轴承适用于机床主轴，单向推力角接触球轴承适用于丝杠支承。
3.
Struts are fixed to each side of the posts to provide further support to the ridge purloin.
立柱两侧安有对角撑,作为对脊檩的进一步支承。
4.
Influence of Eccentric Support on two-span Curved Box-girder Bridges with 45-degree central angle
偏心支承对45度圆心角双跨弯箱梁桥的影响
5.
Remember do not overdo them; they just are filling in a supporting role.
记住不要过多的使用，它们只是承担支援角色。
6.
The Bending of Isotropic Shellow Spherical Shell Supported by Corner Colums of Panels with Uniform Thickness;
角点支承的等厚度各向同性球面扁壳的弯曲
7.
Wind Induced Response Analysis of Triangle Cable Network for Supporting FAST Reflector;
FAST反射面支承结构三角形索网风振响应分析
8.
Analyzing the Characteristics of Natural Vibration of Square Pyramid Space Grids under Different Support Forms;
不同支承形式正放四角锥网架自振特性分析
9.
a fulcrum bearing
支点承座, 刀口承
10.
A triangular section of vaulting between the rim of a dome and each adjacent pair of the arches that support it.
方墙四角圆穹顶支承拱位于顶穹边缘和每对相邻支撑圆拱之间拱形结构的三角形部分
11.
Analysis of Orthogonal Pyramid Space Grid and Bottom Peripher Supporting System;
正放四角锥网架与下部支承体系整体结构空间分析研究
12.
Identification of angular stiffness of joint for rectangular plates with one-edge elastic supporting and three-edge free
一边弹性支承三边自由矩形板对接处角刚度的识别
13.
"Traditional wooden staircases are constructed with stringers, Beams inclined to the angle of the staircase. Stringers are supported by newel posts, which also support the handrail, forming a Balustrade. "
踏阶设在依楼梯角度倾斜的楼梯侧板之间,楼梯侧板支在立柱上,立柱也支承楼梯扶手和栏杆。
14.
Abstract: Using the united method in this paper, the bending solution of the rectangular plate with one edge built-in and one or two corner point supported can be derived under arbitrary load.
文摘:本文的统一解法可以解决悬臂板或带有角点支承时在任意荷截作用下的弯曲。
15.
Using the united method in this paper, the bending solution of the rectangular plate with one edge built-in and one or two corner point supported can be derived under arbitrary load.
本文的统一解法可以解决悬臂板或带有角点支承时在任意荷截作用下的弯曲。
16.
With SLS channel and Fittings to form as beam, bracket, frame, for Piping.
组成各种形关的辅助钢结构,如横梁、角架、架等，用于支承管道并向建筑结构合理的传递荷载。
17.
To support or prop up with or as if with a long, narrow pillow or cushion.
支撑如用长枕靠垫支撑或支承
18.
In order to represent this behaviour, we can consider one of the supports to be a pin support and all the others to be roller supports.
为阐明这一特点，设梁的支承之一为销轴支承，其他均为辊轴支承。