1.
RESEARCH ON PERFORMANCE OF ENHANCEMENT POST-PROCESSED PLASTIC POWDER SINTERING PIECES
塑料粉末烧结件的增强后处理性能研究
2.
Standard specification for sintered austenitic stainless steel structural part
GB/T13827-1992烧结奥氏体不锈钢结构零件技术条件
3.
Sintered titanium filter and filtration materials
GB/T6887-1986烧结钛过滤元件及材料
4.
Sintered nickel-copper alloy filter
GB/T6889-1986烧结镍铜合金过滤元件
5.
Specification for sintered uranium dioxide pellets
GB/T10266-1998烧结二氧化铀芯块技术条件
6.
Design and development of optimizing iron ores matching model and software
烧结优化配矿模型的设计与软件开发
7.
Effects of Environmental Conditions on Sintering and Tempering for NdFeB Alloys
环境条件对NdFeB合金烧结和回火的影响
8.
Research on the Conditions of Sodium Sintering Process and the Infulence of Al_2O_3 Leaching Rate at Middle Grade Bauxite Contain Different Sulfur
中等品位铝土矿纯碱烧结法烧结条件及硫影响研究
9.
Effect of Sintering Condition on High Cementing Property Cement Clinker and Alite Crystal Structure;
煅烧条件对高胶凝性水泥熟料的烧成和阿特晶体结构的影响
10.
Specification for nuclear-grade sinterable uranium dioxide powder
GB/T10265-1998核级可烧结二氧化铀粉末技术条件
11.
Investigation into Manufacturing Metal Parts via Indirect Selective Laser Sintering;
选择性激光烧结间接制造金属零件研究
12.
Study on the Polymer Materials of Selective Laser Sinteringand the Properties of Sintered Parts;
选择性激光烧结高分子材料及其制件性能研究
13.
The Study of the Post-treatment of the Polymer-coated Molybdenum Powder Parts Formed by Selective Laser Sintering (SLS);
覆膜钼粉激光烧结成型件后处理工艺研究
14.
Study on the Part Precision of Rapid Prototyping of Selected Laser Sintering;
选择性激光烧结快速成型制件精度的研究
15.
Preparation of Equalatomic TiNi Alloy by Hot Pressing Sintering at Lower Temperature
低温条件下热压烧结法制备等原子比TiNi合金
16.
Ablation-Thermal-Structure Test of Large Scale Model in Φ1m Arc Heated Wind Tunnel
Φ1m电弧风洞大尺度防隔热组件烧蚀热结构试验
17.
Research on the Influence of Sintering Temperature on the Thick Film SrTiO_3 Oxygen Sensor
烧结温度对SrTiO_3厚膜氧敏元件的影响研究
18.
Properties of the selective laser sintered specimens of nylon12-coated aluminum powders
尼龙12覆膜铝粉激光烧结成形件的性能研究