1.
Equilibrium Grain Boundary Segregation of Phosphorus and Molybdenum in a 2.25Cr1Mo Steel;
2.25Cr1Mo钢中P与Mo的平衡晶界偏聚
2.
Discussion of the Spot Welding About Different Kinds of Cr-Mo Ste el;
不同Cr-Mo钢现场焊接工艺探讨
3.
DISCUSSION ON POSTWELDING HEAT TREATMENT PROCESS OF CR-MO STEEL PRESSURE EQUIPMENT
Cr-Mo钢承压设备焊后热处理工艺的探讨
4.
Study on the Strain Induced Transformation of Cr-Mo Steels;
Cr-Mo低合金钢形变诱导相变规律研究
5.
Research on Welding Process of 2.25Cr1Mo0.25V and Q345 steel
2.25Cr-1 Mo-0.25V与Q345R异种钢焊接技术应用
6.
Effect of Mo and V on the Microstructure and Properties of Fire-resistant Steel;
合金元素Mo、V对耐火钢组织及性能的影响
7.
Development and Application of Cr-Mo Gear Steel for Automobile;
载重卡车用Cr-Mo系列齿轮钢的开发与应用
8.
STUDY ON LONGITUDINAL WEB FRACTURE IN Cr-Mo ALLOY RAIL;
Cr-Mo合金钢轨轨腰水平断裂机理的研究
9.
Effect of K/Na-Mo Multiple Modification on Structure and Property of M2 High-speed Steel;
K/Na-Mo复合变质对M2高速钢组织和性能的影响
10.
Microstructure and Properties of C-Si-Mn-Cr(Mo) Cold Rolled DP980 Steels
C-Si-Mn-Cr(Mo)系980MPa级冷轧双相钢的组织性能研究
11.
Investigation on quenching microstructures of a new Cr-Mo low-carbon micro-alloyed steel
新型低碳Cr-Mo系合金钢淬火态的金相组织研究
12.
Preparation of Mo/High-Carbon Steel Composite Coating by Wire Explosion Spraying
电爆炸喷涂制备Mo/高碳钢复合涂层的研究
13.
Study on Static Softening Behavior of Cu-P-Cr-Ni-Mo Weathering Steel
Cu-P-Cr-Ni-Mo耐候钢的静态软化行为研究
14.
Effect of Mo addition on microstructure and CCT curves of Nb microalloyed pipeline steel
添加Mo对高Nb管线钢组织和CCT曲线的影响
15.
Heat treatment of a new type of thermal strengthening and corrosion resistance steel Fe-Cr-Mo-V
新型Fe-Cr-Mo-V系热强耐蚀钢的热处理工艺
16.
Influence of tempering temperature on precipitates in Nb-Mo-V micro-alloyed steel
回火温度对Nb-Mo-V微合金钢中的析出物的影响
17.
STUDY ON SURFACE AND WEAR PROPERTIES OF CrMoN COATINGS WITH DIFFERENT Mo CONTENT
Mo含量对Cr12MoV钢表面CrMoN涂层磨损性能的影响
18.
Research on TRIP steel with Nb and Mo by thin slab casting and rolling process
薄板坯连铸连轧Nb-Mo微合金TRIP钢的研究