1.
Temperature Controling System of Semi-Solid ZL201 Alloy Remelting;
半固态ZL201铝合金重熔温度控制系统
2.
Research on Temperature Field Numerical Simulation and Performance of Laser Re-melted Ni-coating Oriented by Jet Electroforming on 45 Steel;
45钢喷射电镀镍层激光重熔温度场数值模拟及其性能研究
3.
The Research of Temperature Field Analysis and Application on Laser Remelted Coating Oriented by Jet Electroforming;
喷射电镀层激光重熔的温度场分析及应用研究
4.
melting point type disposable fever thermometer
熔点型消耗式温度计
5.
fusible-element-type fixed temperature detector
易熔合金温度探测器
6.
EFFECT OF TEMPERATURE DISTRIBUTION ROUND THE MOLTEN SLAG POOL ON INGOT QUALITY DURING ESR PROCESS OF SUPERALLOY
电渣重熔过程中渣池内温度分布对冶金质量的影响
7.
Numerical Simulation on the Temperature Field and Microstructure Analysis of Laser Remelting Composite Ceramic Coating on TiAl Alloy Surface
TiAl合金表面激光重熔复合陶瓷涂层温度场数值模拟及组织分析
8.
Numerical simulation of temperature field of melting pools with different horizontal width in the bottom of float glass furnace
浮法玻璃熔窑熔化池底部横向宽度对熔化池温度场影响的研究
9.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
10.
The measures that can control the generation of brokea filament wore put forward.
提出了控制熔体温度、缩短熔体输送停留时问。
11.
Study on Improving the Fusibility of Shenhua-coal-ash;
提高神华煤灰熔融温度和熔融性的研究
12.
Effect of Fluxing Agent B_2O_3 on Melting Temperature of CaO-Based Refining Slag
B_2O_3作助熔剂对CaO基精炼渣系熔化温度的影响
13.
Numerical Simulation of the Temperature Field during Aluminum Melting Process
铝熔炼过程合金熔体温度场的数值模拟
14.
These alloys weld at different heats.
这些合金可在不同的温度 [热度] 熔接。
15.
Influence of Feeding Angle on Temperature Field in Molten Pool
不同水口角度对熔池内温度场的影响
16.
Effent on Melting Temperature and Viscosity by Adding Mineralizers to the Slag
矿化剂对矿渣熔化温度与黏度的影响
17.
The heat of fusion is the heat required to melt a substance at its normal melting temperature.
熔化热是一种物质在其熔点温度全部熔化所需要的热量。
18.
Effect of ESR on Cryogenic Toughness of Austenitic Steel
电渣重熔对奥氏体钢低温韧性的影响