1.
Investigation of Microstructure and Stress Distribution of the Fe_3Al Joint Zone by Fusion Welding
Fe_3Al熔焊接头区组织结构及应力分布研究
2.
Microstructure and Mechanical Property of TIG Welded Joints of Titanium Alloy/Stainless Steel;
钛合金/不锈钢TIG熔焊接头微观组织及力学性能分析
3.
Numerical Simulation on Residual Stress Fields and Temperature Fields of Weld Joint in the Process of Fusion Welding
熔化焊焊接接头的温度场和应力数值模拟
4.
Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T3323-1987钢熔化焊对接接头射线照相和质量分级
5.
All full-penetration joints shall be back purged with argon or helium.
所有全熔透焊接接头用氩或氦进行反吹。
6.
Damage Behavior of Welded Joints with Defects on Fusion Line;
熔合线含缺陷焊接接头损伤行为的研究
7.
Influence of laser melting on microstructure and properties of 1Cr18Ni9Ti welding joint
激光熔凝对1Cr18Ni9Ti焊接接头组织和性能的影响
8.
Analysis on temperature field in electrofusion joint for polyethylene pipes
聚乙烯管道电熔接头焊接过程温度场分析
9.
Investigation on Fracture Resistance of MAG Deposited Metals and Welded Joints of Three Gorges Hydro-turbine Runners;
三峡转轮气体保护焊熔敷金属及焊接接头断裂性能研究
10.
The Research on the Auto Ultrasonic Detection System of Copper-steel Re-melt Deposit Welding;
铜—钢熔敷焊接头自动超声检测系统研究
11.
Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing
铝/钛异种合金激光熔钎焊接头温度分布
12.
Hardness and microstructure of China low activation martensitic steel fusion welded joint
中国低活马氏体钢熔化焊接头硬度与微观组织
13.
An Investigation on Characteristics of Fretting Tribology for Fusion Welded Joint Metals of Typical Steels
典型钢材熔化焊接头金属的微动摩擦学性能
14.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
15.
Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy
铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较
16.
Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes
GB/T12605-1990钢管环缝熔化焊对接接头射线透照工艺和质量分级
17.
Research on Defect Recognition of the Copper Steel Non-depth of Fusion Weld Joint Based on Ultrasonic Testing;
铜—钢无熔深焊接接头超声检测缺陷识别及规律研究
18.
Study on Fracture Performance and Engineering Safety Evaluation Method of Welded Joints Containing Crack on Fusion Line;
熔合线含裂纹焊接接头断裂性能及其工程安全评定方法研究