1.
Modeling and Analyse of Flexible Flapping-Wing for a Micro Air Vehicle Based on Rigid Finite Element Method
基于有限刚体元方法的微扑翼飞行器柔性翅翼建模与分析
2.
The Dynamic-Motion Analysis of Flapping Wing Using Rigid Finite Element Method
有限刚体元方法在微扑翼飞行器翅翼动力分析中的应用
3.
Law of ore and rock flow principle based on rigid-body discrete element model
基于刚体离散元模型的矿岩散体流动规律
4.
An Analysis on the Stiffness and Modelling for Model 6135 Diesel Engine Cylinder Block by FEA
6135柴油机机体刚度和模态的有限元分析
5.
The Finite Element Global Analysis of Steel Frame with Semi-rigid Connections and It s Performance;
半刚接钢框架的有限元整体分析及其影响
6.
Analysis of a Rubber Wedge Contacting with a Rigid Notch and the Finite Element Computation;
橡胶楔体与刚性缺口接触分析及有限元计算
7.
ADSORPTION KINETICS OF CONGO RED AND Cu(Ⅱ) BY CHITOSAN UNDER BINARY SYSTEM
刚果红和Cu(Ⅱ)二元体系壳聚糖的吸附动力学
8.
Decomposed Error Quaternion-Based Rigid Body Attitude Tracking System with Sliding Mode Control
基于误差四元数分解的刚体姿态跟踪滑模控制
9.
Static and Dynamic Analysis of Transversely Isotropic Rigid Road Surface Structure by Finite and Infinite Element
横观各向同性刚性路面体系有限元—无限元耦合静动力特性研究
10.
Syntheses and Self-Asembly of Rigid and Semirigid Five-Membered Heterocyclic Bridging Ligands and Symmetric Fulvene Ligands;
五元杂环桥联刚性、半刚性有机配体及富烯配体的合成及自组装研究
11.
The stiffness matrix of the assemblage of elements is then generated in the same way as in the case of frames.
然后，按框架情况的相同方法建立诸单元组合体的刚度矩阵。
12.
A rigid finite element method for upper bound limit analysis of soil slopes subjected to pore water pressure
考虑孔隙水压力的土坡稳定性的刚体有限元上限分析
13.
The Finite Element Analysis and Pseudo-static Experiment Study on the Steel Frame with Semi-rigid Connections;
半刚性钢框架整体性能的有限元分析及拟静力试验研究
14.
Experimental Study on Semi-Rigid Joint and Basic Load-Bearing Element in Plug-pin Steel-tube Scaffold;
插销式钢管脚手架半刚性节点及基本受力单元体试验研究
15.
Static and Dynamic Stability Analysis of Jinping High Arch Dam Abutment Using RBSM;
锦屏一级高拱坝坝肩动静力稳定性刚体弹簧元分析
16.
Finite Element Analysis to Deviator and Design of Continuous Rigid Frame Bridge Strengthened by External Prestressing;
体外预应力加固连续刚构桥设计及转向块有限元分析
17.
Finite Element Analysis of Dynamic Characteristics and Checking of Lateral Stiffness of Lattice Light-Gauge Joist Steel System
格构轻钢龙骨体系动力特性有限元分析及抗侧力刚度验算
18.
Transmitter Shell Design for Injection Mold Wall Thickness and Static Stiffness Finite Element Analysis
探测器壳体注塑模具型腔壁厚设计及静刚度有限元分析