1.
Heat treatment of steel for extrusion wheel of CONFORM clad machine
连续挤压成型包覆机挤压轮用钢的热处理工艺
2.
Theoretical Research of Groove Deformation Zone of Wide Copper Strip Continuous Extrusion;
宽铜带连续挤压轮槽变形区的理论研究
3.
Research on Warm Extrusion of Gear Shaft Base on FEM Technology;
基于FEM技术的齿轮轴温挤压成形研究
4.
Research on the Key Technology of Cold Forging of Spur Gear;
直齿轮冷挤压成型若干关键技术研究
5.
Application of Cold Extruding Technology of Spur Gears
冷挤压技术在圆柱齿轮成形中的应用
6.
Optimization of the Hot Extrusion Parameter for Hub Tube Based on Taguchi Method
基于Taguchi的轮毂套管热挤压工艺优化
7.
Study and Application of Hot Extrusion Process for Boss Quill
汽车轮毂轴管复合热挤压工艺的研究与应用
8.
Extrusion Forming Technology and Numerical Simulation in Straight-tooth Bevel Gear;
直齿圆锥齿轮挤压成形工艺与数值模拟
9.
A Technique of Isothermal Extrusion Pre-forming and Optimization of Mould Structure for Globoidal Indexing Cams Parts;
弧面凸轮等温挤压预成形工艺与模具结构优化
10.
Study on Extrusion Forming Technology and Experiment of 7A04 Aluminum Alloy Wheel Hub;
7A04铝合金轮毂挤压成形工艺与实验研究
11.
Study on Extrusion Forming Process and Experiment of 7A04 Aluminum Alloy Wheel Felloe;
7A04铝合金轮辋挤压成形工艺与实验研究
12.
Die Cast Dies Design for Semi-solid Rheo-Extrusion Technique and Study on the Process Properties of Gear of Tachometer;
测速齿轮半固态挤压成型模具设计与工艺研究
13.
The Pore-forming Mechanism Study of Cam Bit on Percussive-Rotary Extruding DTH Drilling
凸轮型冲击回转挤压钻头成孔机理的研究
14.
Effect of Forming Process Parameters of Magnesium Alloy Wheels on Anti-extrusion Height
镁合金轮毂变形参数对反挤压高度的影响
15.
Numerical Simulation of Semi-solid Extrusion for Spur Gear
直齿圆柱齿轮半固态挤压成形的数值模拟研究
16.
Study on the ADI Nodular Cast Iron Gear by use of the Squeeze Casting
ADI球铁螺旋伞齿轮的挤压铸造试验研究
17.
Simulation and experimental study on cold extrusion forming technology of hole-through internal gear
贯通内齿轮冷挤压成形工艺仿真与试验
18.
Numerical Simulation of the Spur Gear Extrusion Shaping Under Different Forms of Dies
不同凹模形式下直齿轮挤压成形数值模拟研究