1.
Sometimes the density of crazes is sufficient to give the stressed plastic a milky appearance.
有时小裂纹密度很大，使受应力的塑料外观呈现乳白色。
2.
To describe the anisotropy of microdamage of the crust block, we use the damage tensor that is expressed in the fissure density.
为描述地壳块体微损伤的各向异性，引入裂纹密度表示的损伤张量形式。
3.
The target material used for video disk is liable to fracture in production,the higher the density,the stronger is the fracture tendency.
此光盘膜用靶材材料极易在制备过程中碎裂 ,并且密度越高 ,裂纹倾向越大。
4.
Dynamic Split Tension Strength of Marble and the Properties of Crack Initiation and Crack Propagation under Dynamic Split Tests;
大理岩动态劈裂拉伸强度和裂纹起裂扩展特性
5.
mullen Bursting strength tester
密廉式破裂强度试验机
6.
Adaptive Control of Nonlinear Cracked Rotor Seal Chaotic System
非线性裂纹转子密封混沌系统自适应控制
7.
Study on Coupled Vibration of Nonlinear Cracked Rotor Seal System
非线性裂纹转子密封系统的耦合振动分析
8.
High environment humidity increases the susceptibility to hy-drogen induced cracking and stress corrosion cracking.
高湿度能增大氢致裂纹和应力腐蚀开裂倾向。
9.
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
10.
The smaller the curvature and the larger the crack length the smaller will be the fracture stress.
曲线半径越小，裂纹长度越大，断裂应力也就越低。
11.
FRACTURE TOUGHNESS MEASUREMENT OF CAST MAGNESIUM ALLOY BY CYLINDRICAL SPECIMEN WITH RING-SHAPED CRACK
用环状裂纹圆柱试样测定铸镁合金的断裂韧度
12.
Multi-scale Analysis of Mechanical Properties on Fracture Process Zone
多尺度下裂纹断裂过程区力学特性分析
13.
Prediction of Burst Strength of Oil Well Casing Strings with Micro-Cracks
含微裂纹油井套管的抗内压断裂强度预测
14.
Fracture Strength of Wires with Cracks in Suspension Bridge
带裂纹的悬索桥主缆钢丝的断裂强度分析
15.
STUDY OF THE CRITICAL TEMPERATURES FOR DELAYED HYDRIDE CRACKING IN N18 ZIRCONIUM ALLOY
N18锆合金氢致裂纹延迟开裂临界温度研究
16.
The st udy shows that the coupled elastic and electric fields inside piezoelectric med ia depend on the speed of the crack propagation, and have singularity at the cr ack tip.
研究表明 :介质内的耦合场与裂纹运动速度有关 ,在裂纹尖端有奇异 ;
17.
Two-dimensional Stress Intensity Factors by BEM with Crack Closure Integrals
边界元法结合裂纹闭合积分求二维裂纹应力强度因子
18.
Shielding Effect Rule of Thermal Fatigue Crack Net and Calculating Method of Stress Intensity Factor of Main Crack
热疲劳裂纹网的屏蔽规律及主裂纹应力强度因子的计算方法