1.
The crystalline feature of ALCOA tabular alumina and tabular corundum by fusion method
板状氧化铝和电熔法板状刚玉的晶体形貌
2.
The conception and technology of producing tabular alundum with electric melting and the composition and structure of tabular alundum are expounded in this article.
阐明了用电熔法生产板状刚玉的构思和工艺要点、板状刚玉的组成与结构。
3.
The forming condition of crystal and closed pore in tabular alundum produced with electric melting is estimated and determined theoretically.
从原理上判断和估计了电熔板状刚玉结晶体和阔气孔的形成条件。
4.
STUDY ON THE PHYSICAL STATES OF IRON, TITANIUM, ALUMINUM AND BORON IN GLASS PHASE OF FUSED CAST AZS BLOCK
电熔铸锆刚玉砖玻璃相中铁钛铝硼的物理状态研究
5.
fused alumina manufacturing technology and complete design technology
电熔刚玉磨料制造与设计技术
6.
An EPMA Study of the Interface between Glass/Fused AZS Refractories
玻璃与电熔锆刚玉砖作用界面的电子探针研究
7.
Study on Corrosion Resistance of Zircon AZS-Bonded Ramming Mix Used for Glass-Kiln
电熔锆刚玉结合锆英石捣打料抗蚀性能的研究
8.
Synthesis of molochite using fly ash from fused brown corundum
电熔棕刚玉除尘粉合成莫来卡特的研究
9.
An Invastigation on Producing Oxidized Fusion Cast 33~# AZS Blocks
氧化法熔铸33~#锆刚玉制品生产工艺研究
10.
TEST OF WATER SOLUBLE CORE WITH ALUNDUM AS BASE MATERIAL IN CASTING ALUMINIUM
以电熔刚玉砂为主体材料的水溶性型芯铝合金铸造试验
11.
Effect of Respectively Adding SiC and Fused Al_2O_3-ZrO_2 Clinker in Al_2O_3-SiO_2 Castables on Resistance to PbO-rich Slag
碳化硅、电熔锆刚玉的引入对Al_2O_3-SiO_2系浇注料抗铅渣性能的影响
12.
Effect of Grain Size of Bauxite Based Electro-fused Zirconia-Corundum on Property of Al_2O_3-MgO Castable
矾土基电熔锆刚玉粒度对Al_2O_3-MgO浇注料性能的影响
13.
Effects of fused corundum-zirconia on corrosion resistance of Al_2O_3-SiO_2 castables to PbO rich slag
电熔锆刚玉对Al_2O_3-SiO_2系浇注料抗铅渣侵蚀性的影响
14.
Studies on the Preparation of Fe-6.5wt%Si Sheet by Molten Salts Electrodeposition;
熔盐电沉积法制备Fe-6.5wt%Si薄板研究
15.
The main material of brown fused alumina is bauxite, which is eletrically fused in high temperature.
棕刚玉是以铝矾土为主要原料，经高温熔炼而成。
16.
Brown Fused Alumina is made from high quality bauxite by fusing in an electric arc furnace at high temperature.
棕刚玉以铝矾土为主要原料，经高温熔炼而成。
17.
"Tinplating: Applying a coating of tin to thin steel sheet either by dipping in molten metal or by electrolytic deposition (electroplating); almost all tinplate is now produced by the latter process, in which the tin coating is applied without heat."
镀锡钢板:用浸入熔融金属或电镀的方法,镀覆锡的薄钢板,目前几乎所有的镀锡钢板经电镀生产。
18.
Template-Directed Method Synthesis of Porous Materials for Lithium-Ion Batteries
模板法制备孔状锂离子电池电极材料