1.
Refiner: A machine for fibrillation of fibres during paper making.There are cone type and disc type of refiners.
精磨机:造纸时，把纤维帚化的机器。有锥型和圆盘精磨机。
2.
Upgrading of grinding mechanism of 3MB3436 superfinishing machine
3MB3436精研机研磨机构改进
3.
The most common finishing operations are mechanical, such as milling, grinding, or polishing with abrasives.
最普通的精加工工序是用机械的方法，如研磨，磨削或用磨料抛光。
4.
flat-surface grinding machine, not numerically controlled 0.01mm minimum accuracy
非数控平面磨削机,最小精确度为0.01mm
5.
Increases the Milling Machine Synchronization Precision Using the Electrohydraulic Servo Valve
应用电液伺服阀提高磨削机同步精度
6.
Studies on Accurate Measure of Real Plate Gap and State Monitoring of Main Spindle of Refiner;
热磨机磨盘实际间隙精确测量与主轴运行状态监测的研究
7.
high accuracy through feed centerless grinding machine
高精度通磨无心磨床
8.
flat-surface grinding machine, numerically controlled in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm
轴定位可精确到少0.01mm的数控平面磨削机
9.
grinding machine numerically controlled in which the positioning in any azis can be set up to an accuracy of at least 0.01mm
数控式平面磨削机轴定位可精确到至少0.01mm
10.
Grinding is the most accurate of all the Basic machining processes.
磨光是许多基本机械处理过程中最精确的一项。
11.
The Dynamic Characteristic Analysis of the MB4250-2 Hing-Precision Control Vertical Honing Machine;
MB4250-高精度立式珩磨机床的动态特性分析
12.
High Efficiency and Precision Diamond Grinding Mechanism and Experimental Study of Silicon Carbide;
碳化硅的金刚石高效精密磨削机理和实验研究
13.
Research and Application of Metallogenic Mechanics for Fine Grinding Magnetite Sintering;
细磨磁铁精矿烧结成矿机理研究及应用
14.
Theoretical and Experimental Studies on the Ultra-Precision Face-Grinding of Engineering Ceramics;
工程陶瓷的超精密磨削机理与实验研究
15.
The Design of Feed System of Ultra-precision Grinding Machine Based on Virtual Prototyping Technology;
基于虚拟样机技术的超精密磨床进给系统设计
16.
Research on the Mechanism and Technology of Efficient Planetary Precise Ball Lapping Method;
行星式精密球体高效研磨加工机理与工艺研究
17.
Control system of lapping machine for precision ball based on ATmega128
基于ATmega128的高效精密球体研磨机控制系统
18.
Accurate tool calibration for robotic conformance grinding system
机器人修形磨削工具坐标系的精确标定方法