1.
Mathematical Model of the Heat Transfer and Optimization of Cap Section Design in Killed-Steel Ingot
镇静钢锭热过程数学模拟及帽口优化设计
2.
THERMAL STUDY ON THE STEEL SOLIDIFICATION PROCESS IN THE HOT-TOP OF 610 TYPE INGOT MOULD
610型镇静钢锭帽口凝固过程的热工研究
3.
Numerical Simulation for Temperature Field of Forging Ingot Solidification Process and Application;
锻造用钢锭凝固过程温度场数值模拟及其应用
4.
Numerical Simulation of the Process of Vertical and Directional Solidification of Large-size Steel Ingot;
大型垂直定向凝固钢锭凝固过程数值模拟
5.
In the case of rimming steel, no or some deoxidation is carried out before casting. During the solidification in the mould carbon monoxide is formed and the gas makes the steel boils.
沸腾钢在铸锭前不脱氧或轻度脱氧。在锭模中凝固的过程中产生的一氧化碳气体使钢液沸腾。
6.
A CASE STUDY OF THE APPLICATIONS OF MODERN CONTROL THEORY TO ENGINEERING-CONTROL OF STEEL INGOT HANDLING PROCESS
现代控制理论工程应用的一个实例——钢锭处理过程的控制
7.
During the solidification in the mould carbon monoxide is formed and the gas makes the steel boils.
在锭模中凝固的过程中产生的一氧化碳气体使钢液沸腾。
8.
Study on Controlling Phase Interface Technology in Producing Hollow Ingot Continuously by Non-sleeve Method;
无芯法连续生产空心钢锭过程中相界面控制技术初步研究
9.
Numerical Simulation of Temperature and Thermal Stress Field in Steel Ingot Solidification Process and Application;
锻造用钢锭凝固过程温度场、应力场的数值模拟及其应用
10.
Simulation on Effects of Electric Current on Stress Ingot in Steel Ingot in Electro-slag Casting (ESC)
电渣熔铸过程中电流大小对钢锭应力场影响的模拟
11.
QUANTITATIVE ANALYSIS OF BENEFITS OF CHARGING TEMPERATURE OF STEEL INGOT OF SOAKING PIT
均热炉钢锭装炉温度效益的定量分析
12.
A large square section of steel intermediate in the rolling process between an ingot and a billet.
定义:钢中间体的一个大方形的部分在辗压过程中在钢锭和钢坯之间。
13.
Blooms are now also being produced by the continuous casting process eliminating the necessity of first producing an ingot.
钢锭在连续的铸件过程中产生并且在工业纯铁第一步生产过程中是必不可少的.
14.
Steel windows, in general, are made from hot-rolled,structural grade new billet steel.However,for double-hung windows,the principal members are cold-formed ftom new billet strip steel.
钢窗一般用新钢锭热轧结构钢制成。但上下推拉窗的主要构件要用新带钢钢锭冷加工成形。
15.
Research on thermal status of 300 t ladle in the process of steel-making and continues casting
炼钢-连铸过程300t钢包热状态测试研究
16.
According to the calculation of interface energy as well as the flow analysis based on gravity, it is claimed that the inclusions distribution was affected by the travel of the excessive[ H] during solidification.
采用相间能计算和重力流动分析得知,此分布规律是过量[]钢锭凝固过程中的运动促成的。
17.
mould setting-and-stripping bay
钢锭模准备和脱锭跨
18.
Generally it goes through two stages to convert steel ingots into rolled steels by rolling.
一般说来，把钢锭轧制成钢材要经过两个阶段。