1.
Study on Evaluation of Mechanical Parameters Based on the Method of GTMR and Bolting-grouting Mechanism of Soft Rock Tunnel;
软岩巷道GTMR法力学参数评估及锚注机理研究
2.
Research of The Support Mechanics On The Soft Rock Tunnel Pin Timbering Injection and Its Application in Repairing Tunnel
软岩巷道锚注机理研究及其在返修巷道中的应用
3.
The Reinforcement Mechanics of Fully Grouted Rock Bolt in Underground Engineering;
地下工程中注浆岩石锚杆锚固机理研究
4.
On supporting and reinforcing of strengthen anchor arm and bolting sustaining in soft rock lanway
软岩巷道高强锚杆和锚注支护加固机理分析
5.
Study about Mechanism of Bolting-Grouting Support Based on Nonlinear Analysis;
基于非线性分析的锚注支护机理研究
6.
Study on Mechanism of Bolting and Grouting Support in Very Broken Rock Renovated Roadway;
极碎围岩整修巷道锚注支护机理研究
7.
The Analysis of Application and Mechanism Theory of the Bolt Combined Bolting-grouting Support in the Soft Rock Roadway;
软岩巷道锚杆和锚注支护共同作用机理研究及应用
8.
Study on the Reinforcement Mechanism of Fully Grouted Rock Bolt Considering the Interaction between Bolt and Wallrock Mass
全长注浆岩石锚杆与围岩体相互作用下的锚固机理研究
9.
The Mechanism Studies of Effect on Base Hole by Anchor Grouting;
锚杆注浆对基坑支护体系作用的机理研究
10.
Research on the Mechanism of Failure of Soft Rock Roadway with High Geo-stress and Bolt-grouting Technique
高应力软岩巷道破坏机理及锚注技术研究
11.
The bolting-grouting support mechanics and application in the deep soft rock tunnel
深井软岩巷道锚注支护机理分析及其工程应用
12.
Mechanics Analysis of Soft Rock Tunnel with Bolt-Grouting Support and the Define of Proper Grouting Time;
锚注加固软岩巷道机理分析及合理注浆时间的确定
13.
Research on Bond Mechanism of GFRP Bolt;
玻璃纤维增强塑料锚杆锚固机理研究
14.
The application for injecting slurry anchor pile in rock dissolve foundation treatment
注浆锚杆桩在岩溶地基处理中的应用
15.
Study on Anchorage Performance and Load-Transfer Mechanism of Embedment Section of Prestressed Rock Cable Bolt;
预应力岩锚内锚固段锚固性能及荷载传递机理研究
16.
NUMERICAL SIMULATION TESTING STUDY ON REINFORCEMENT MECHANISM OF PRESTRESSED ANCHORAGE CABLE
预应力锚索锚固机理的数值模拟试验研究
17.
The Anchoring Mechanism of High-strength Prestressed Anchor and Time-dependent Deformation Analysis of Bolted Rock Mass;
高强预应力锚杆的锚固机理及时效性分析
18.
Research on Prestressed (Distribution) Tendon s Mechanism Study and Using in Engineering;
压力（分散）型锚索锚固机理及工程应用研究