1.
Effect of local convex cylindrical blank-hold surface on square box part forming
局部凸柱面压料面对方盒形件成形的影响
2.
Scattering of SH-Wave and Dynamic Stress Concentration on a Piezoelectric Medium with an Inclusion Near the Interface;
压电材料中界面附近圆柱夹杂对SH波的散射及动应力集中
3.
road mix surface
沥青拌合料压成的路面
4.
The Research on the Surface Processing Method of High Pressure Pump Plunger;
高压泵柱塞表面切削加工方法的探讨
5.
The Stability Calculation of Slight Sections Column Pressed by Single-direction Eccentric Force;
窄截面柱单向偏心受压时的稳定计算
6.
Calculation of Bearing Capacity of Axial Compression Short Column with Round Cross-Section Reinforced by Enlarging Cross-Section Method
扩大截面加固轴心受压圆截面短柱承载力计算
7.
Light pressure is needed for lightweight fabrics and increased pressure is necessary for heavier weights.
轻压力的压脚适用于薄型面料；重压力的压脚适用于厚型面料。
8.
Pressure Boundary material - metallurgy of the castings and components.
压力界面材料:铸件和部件材料。
9.
Sound intensity measurement-based phase reconstruction of complex sound pressure on holographic surface within a cylindrical cavity
基于声强测量的圆柱内部全息柱面复声压相位重构
10.
New Method of Founding Profile Equations and Pressure Angle Formula to the Cylindrical Cam Mechanism with Slide Roller-Follower
建立圆柱凸轮廓面方程及压力角公式的新方法
11.
TECHNOLOGY FOR MINE OF HIGH EFFCIENCY ON SAFETY IN THE SINGLE HYDRAULIC PROP CANNON COAL FACE
单体液压支柱炮采面安全高效开采技术
12.
Analyse and design of the supporting density on the individual hydraulic prop working face
单体液压支柱工作面支护密度的分析与设计
13.
Dynamic Anti-plane Interaction of Two Piezoelectric Inclusions;
两个压电圆柱夹杂的动力反平面相互作用
14.
Dynamic Anti-plane Characteristics of Piezoelectric Matrices with Homocentric Cylindrical Inclusions;
多层压电圆柱夹杂结构的动力反平面特性
15.
Strata Behavior of Fully Mechanized Coal Face with Sublevel Caving by Light Supports in Faults Pillar;
断层孤岛煤柱轻放工作面矿压显现规律研究
16.
Research on Behavior of Inequiaxial Specially Shaped Column Subjected to Biaxial Compression;
不等肢异形截面双向偏心受压柱性能研究
17.
Theoretical Research on the Load Capacity of Eccentric Compressive Circular Section Column by Enclosed Reinforcement;
围套加固偏心受压圆截面柱承载力理论研究
18.
Study on Design of Welded H-column under Axial Compression;
焊接H形轴心受压柱截面设计方法研究