1.
restrained torsion of thin walled bar
薄壁杆件的约束扭转
2.
Such members are much more flexible in torsion than those with a solid section.
这样的杆件在扭转时比实心截面的杆件柔得多。
3.
The members in Fig. 1-45 have a neat fit at the time of assembly.
图1-45中的杆件在安装时已调整好。
4.
A New High-Order Multi-Joint Finite Element for Thin-Walled Bar
一种新型的高次多结点薄壁杆件单元
5.
A New Torsional Stiffness Matrix of Thin-Walled Bar Elements
一种新的薄壁杆件单元扭转刚度矩阵
6.
ANALYSIS OF DYNAMIC PROPERTY OF BAR UNDER HORIZONTAL VERTICAL VIBRATING LOAD
纵横振动荷载下杆件的动力性能分析
7.
Design of Communication Tower Based on Finite Element Method and Its Stress Analysis;
通信铁塔有限元设计及杆件应力分析
8.
Analysis and Test for Performances of the Members in Existing Space Truss;
现役网架结构杆件特性的分析与测试
9.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
10.
REAR BUMPER REINFORCEMENT
将后保险杆加强组件
11.
barrel buffer piston rod assembly
枪管缓冲器活塞杆组件
12.
fitting ,nickel, for tubular railings and structural elements
镍配件,用于管形栏杆和结构元件
13.
Advance in numerical study on performance of screw elements in screw extruder
螺杆挤出机螺杆元件性能数值研究的进展
14.
Die-casting Die Design of Impeller of Swing Block and Ejector Pin with Advanced Return Pin
摆块与推杆推件带预复位杆的叶轮压铸模设计
15.
Now, we have a annual production of7 million semi-finishes and2 million of finished products.
现已具备年产700多万件连杆毛坯，200余万件连杆成品的生产能力。
16.
Tighten needle bar connection screw 2 in needle bar connection 3 so that the marker line of the needle bar aligns with the bottom end of needle bar lower bushing 1 at the lowest position of the needle bar.
在针杆最下点，让针杆下金属部件1对准针杆的刻线，然后拧紧针杆套筒3紧固螺丝2。
17.
Position front bumper reinforcement on vehicle.
将前保险杆加强组件置于车轮。
18.
Technical specification of single screw pumps
GB/T10885-1989单螺杆泵技术条件