1.
Development of the Intelligent Measurement and Control System for the JPM-1 Contact-fatigue Tribometer;
JPM-1型接触疲劳磨损试验机智能化测控系统的研究
2.
The Effect and Mechanism of the Cermet Additive in Lubricating Oil on Contact Fatigue and Sliding Wear Performance of Steel/Steel Friction Pair;
陶瓷添加剂对钢/钢接触疲劳及滑动磨损性能的影响及机理研究
3.
Contact Stress and Fatigue Wear Failure Analysis of Medium-sized CNG Engine Cam/Tappet;
中型CNG发动机凸轮/挺柱接触应力与疲劳磨损失效分析
4.
Study on Coupling Relationship between Rolling Contact Fatigue and Wear of Wheel-Rail and Prevention Measures;
轮轨滚动接触疲劳与磨损耦合关系及预防措施研究
5.
The Contact Fatigue and Wear Resistance of ADI
奥贝球墨铸铁的接触疲劳与耐磨性能
6.
Study on Contact Fatigue Failure of Tractor Second Shaft Gear
拖拉机二轴齿轮接触疲劳损坏的研究
7.
Analysis on Fatigue Cracking of Cylinder Cap Bolt
缸盖螺栓接触损伤引发疲劳开裂分析
8.
Rolling Contact Fatigue Life Prediction Based on the Surface Integrity Induced by Grinding Process
基于磨削加工表面完整性的滚动接触疲劳寿命预测
9.
The main wear mechanisms are adhesion, diffusion and fatigue.
磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。
10.
Influence of rolling contact fatigue loads on stress intensity coefficients of rail surface contact fatigue crack
滚动接触疲劳载荷对铁轨表面接触疲劳裂纹应力强度系数的影响
11.
Fatigue Wear Analysis of the Friction Couple of SiC and ZrO_2 Ceramics by Finite Element Method
SiC与ZrO_2摩擦副疲劳磨损的有限元分析
12.
Finite element analysis on the contact fatigue life of high speed angular contact ball bearings
高速角接触球轴承接触疲劳寿命的有限元分析
13.
Impact Fatigue Resistance and Abrasiveness of Cross Rolled Medium Chromium Semi Steel for Grinding Ball
斜轧中铬半钢磨球的冲击疲劳和磨损性
14.
The Fatigue Wear and Wear-resistance of EDM Layer of Cold Stamping Die
冷冲模电火花加工层的疲劳磨损与耐磨性
15.
Standard of test method for surface load capacity of gears
GB/T14229-1993齿轮接触疲劳强度试验方法
16.
Exposure may produce olfactory fatigue or habituation.
接触可以引起嗅觉疲劳或成瘾。
17.
Finite Element Analysis on Fretting Fatigue Contacting Stresses
微动疲劳接触应力的有限元分析研究
18.
Surface Contact Fatigue Failure Analysis on the Cam of CNG Engine
CNG发动机凸轮表面接触疲劳失效分析