说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 斜轧延伸
1.
A simulator for the characteristic values of steel tube cross-rolling elongation has been set up and relevant computer simulation software developed.
建立了钢管斜轧延伸特征值模型,开发出斜轧特征值计算机模拟软件。
2.
Technology for Controlling Elongation on 1 500 mm Cold Rolled Skin Pass Mill in Angang
鞍钢1500mm冷轧平整机组延伸率控制技术
3.
Elongation Control Technique of Temper Mill for 1500mm Cold Rolling
1500mm冷轧平整机的延伸率控制技术
4.
Study on Improving the Elongation of SPCC Cold Rolled Plate
提高SPCC冷轧板断后延伸率的研究
5.
This muscle runs obliquely downwards inside the abdominal cavity.
这肌肉在腹腔内倾斜地向下延伸。
6.
Water Base Drilling Fluid Technology for Double-target High Angle Wells.
双靶点大斜度延伸井水基钻井液技术
7.
To flatten, stretch, or mold(metal) by hammering or die stamping.
轧制通过捶打或印模而使金属展平、延伸或成形
8.
Method of Design Passes for Uniform Extension of Continuous RollingⅠ-Beam's Waist and Leg
连轧工字钢腰腿均匀延伸的孔型设计方法
9.
Elongation Stability Control of Strip by Skin-pass Mill in CAL
冷轧连续退火带钢平整延伸率稳定性控制
10.
At the back, a flower garden slopes down to a line of poplar trees.
在背面,有座花园成倾斜状,其斜坡一直延伸到一排白杨树。
11.
total elongation and fish-tail change with liquid core rate of steel ingot; join mark and splits etc. produced surface of the rolled metal.
轧件的总延伸和鱼尾量随轧件的液芯率而变化,在轧件表面产生交接痕及裂纹等。
12.
A chute or slope will be erected which is more than ten metres high, looking like a slanting cascade over the river.
冰橇滑道台高10多米,长长的延伸开去,像斜挂的瀑布,直向江心泻去。
13.
The terrace before her hugged the curve of the road tumbling erratically down the hill and into the gloom.
斜坡上的阶梯不规则地向下延伸,一直到那阴暗处。
14.
A structure with a single-pitch roof that is attached to the side of a building as a wing or an extension.
搭连主墙有一斜屋顶的构造,边接在建筑物侧面作为侧厅或延伸物
15.
The recommended gradient is to be 1:4 (i.e., about 1 unit out for every 4 units in height).
推荐斜率为1:4(即:每延伸4个单位增加1个单位高度)。
16.
Key Technology of the Northern Extended Section of Shanghai Rail Transit Line 3
上海轨道交通3号线北延伸工程浅埋段斜穿富锦路关键技术
17.
Analysis on the Roller Cone Angle Design of Smooth Rolling of Skew Rolling Piercer
斜轧穿孔机轧辊辗轧锥角的设计分析
18.
To thrust out or extend something.
伸出伸出或延展某物