1.
MECHANISM OF FACETED MORPHOLOGY OF BULK ALUMINA FABRICATED BY COMBUSTION SYNTHESIS MELTED CASTING UNDER ULTRA-HIGH GRAVITY
超重力燃烧合成熔铸Al_2O_3陶瓷晶粒刻面形貌的形成机理
2.
Study on Fabrication Al_2O_3/Cu Composites by Casting Process;
熔铸法制备Al_2O_3/Cu复合材料的研究
3.
Peritectic microstructure of fused cast α,β-alumina block
熔铸α,β-Al_2O_3制品的包晶显微结构
4.
FABRICATION OF Al_2O_3/YAG/YSZ EUTECTIC CERAMIC BY COMBUSTION SYNTHESIS MELT CASTING UNDER ULTRA HIGH GRAVITY FIELD
超重力辅助燃烧合成熔铸制备共晶陶瓷Al_2O_3/YAG/YSZ
5.
The Thermodynamics and Kinetics Analysis of in Situ Al_2O_3-TiC_p/Al Composites Fabricated by Melting and Casting;
熔铸法原位自生Al_2O_3-TiC_p/Al基复合材料的热力学及动力学分析
6.
Deformation Behavior of In-Situ Al_2O_3-TiC/ZL109 Composite Fabricated by Melting Cast Method during Compression at Elevated Temperature
熔铸法原位自生Al_2O_3-TiC/ZL109复合材料高温压缩变形行为研究
7.
Research on Properties of Al_2O_3-CaO Slag
Al_2O_3-CaO熔渣性能的研究
8.
To make(objects)by pouring molten material into a mold.
铸造将（熔化物）注入铸模，得到铸件
9.
Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone
CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究
10.
The statue was melted into a cannon.
铸像被熔成为一尊大炮。
11.
The lead was melted down and poured into moulds.
铅被熔化后倒入了铸模。
12.
Principles of Cast Alloy & Melting
铸造合金原理及熔炼
13.
The Laser Surface Cladding of AZ91D Magnesium Alloy with Al+Al_2O_3 Powders;
AZ91D镁合金表面激光熔覆Al+Al_2O_3涂层研究
14.
STUDY ON PROCESS OF PREPARING A12O3/A1 BY THE PRESSURELESS INFILTRATION TECHNIQUE;
熔渗法制备Al_2O_3/Al复合材料工艺研究
15.
Study on Plasma Surface Melting and Al_2O_3/TiB_2 Coating of Magnesium Alloy
镁合金等离子束熔凝及Al_2O_3/TiB_2涂层研究
16.
Research melting temperature of the CaO-Al_2O_3-SiO_2-MgO-CaF_2 salg
CaO-Al_2O_3-SiO_2-MgO-CaF_2渣系熔化温度的研究
17.
Effect of Al_2O_3 on the Wear Resistance of Nickel-based Alloys Coating by Laser Cladding
Al_2O_3对激光熔覆镍基涂层耐磨性的影响
18.
Effect of laser cladding layer of Al_2O_3 on the corrosion of nickel-based alloys
Al_2O_3对激光熔覆镍基涂层腐蚀性的影响