说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 热灯丝CVD
1.
In the paper, the enhancing process of diamond nucleation by negative substrate bias in hot filament CVD system was analyzed.
对利用热灯丝CVD沉积金刚石膜时负衬底偏压增强金刚石的核化过程进行了分析。
2.
The Preparation of Device-Quality Hydrogenated Amorphous Silicon Thin Films by Mwecr-Cvd Assisted by Hot-Wire;
热丝辅助MWECR-CVD制备器件级非晶硅薄膜
3.
Effect of Reacting Gas Admission Way on HFCVD Diamond Films
进气方式对热丝CVD制备金刚石薄膜的影响
4.
Preparation of free-standing diamond thick films of large area and high quality using hot-filament CVD method
热丝CVD法制备大面积高质量自支撑金刚石厚膜
5.
Studies of a-Si:H Microstructure by Hot Wire Assisted Mwecr CVD Technique;
热丝辅助MWECR CVD制备氢化非晶硅薄膜的微结构研究
6.
The light of an electric lamp come from an incandescent filament.
电灯光亮来自白热的灯丝。
7.
The light of an electric lamp comes from an incandescent filament
电灯光亮来自白热的灯丝
8.
The liberation of electrons from a hot wire is called thermionic emission.
电子从热灯丝逸出,叫做热电子发射。
9.
open glass bulb[without fittings, for electric filament lamps and vapour discharge lamps]
敞口玻璃灯泡[不带配件,用于白热丝电灯和气体放电灯]
10.
The filament gives off light when heated by an electric current.
当灯丝藉助于电流而加热时,就会发出亮光。
11.
When the electric current is turned on, it ignites the tungsten filaments in the bulb.
电流一接通就使灯泡里的钨丝灼热发光。
12.
The source of electrons in an electron microscope is a heated filament.
电子显微镜中的电子源,是一加热的灯丝。
13.
The effect is caused by the escape of electrons from the hot filament.
这个效应是由于电子从热灯丝逸出而引起的。
14.
Area Source Filament Thermion Emission Flow Density And Uniformity Analysis
面源灯丝的热电子发射电流密度和均匀性分析
15.
Development of Wheel for CVD Diamond Thermo-Chemical Polishing
CVD金刚石膜热化学抛光盘的研制
16.
STUDY ON PREPARATION OF MICROWAVE CVD DIAMOND HEAT SPREADER
微波CVD金刚石热沉片的制备研究
17.
Physically, the filament minutely heats up and cools down at twice the line rate, due to AC applied to the filament.
实际上,由于加载在灯丝上的交流电,灯丝基本上是以两倍市电频率加热或冷却。
18.
In small lamps, all the air is pumped from the glass bulb, forming a vacuum, which prevents the white - hot filament from burning away.
在小照明灯中,所有的空气都从灯泡中抽出,形成真空,以防炽热的灯丝被烧毁。