1.
Study on Control Methods of Cutter Location for Machining Cylindrical Cam Based on Double Envelope Principle
基于两重包络原理的圆柱凸轮加工刀位控制方法研究
2.
Study on free surface modeling of NC machining tool-path generation
自由曲面数控加工刀位轨迹生成方法的研究
3.
Study on Free Surface Modeling of NC Tool-path Generation in the Lab
自由曲面数控刀位轨迹生成方法的实验研究
4.
CNC Machining of the Workpiece Coordinate System Knife Set of Control Methods
数控加工中对刀设定工件坐标系的控制方法
5.
Research and Application on the Tool-axis Vector Control during the 5-axis CNC Programming based on MasterCAM 9.0
基于MasterCAM 9.0五轴编程刀轴矢量控制方法及应用
6.
Research on the Basic Kinematics-Geometry Theory and Tool Positioning Strategy for 5-axis NC Machining;
五坐标数控加工运动几何学基础及刀位规划原理与方法的研究
7.
Study on Calculation Method of Non-interference Cutter Pass for Complex Surfaces with NC Machining;
复杂曲面数控加工无干涉刀位轨迹的计算方法研究
8.
Knife shaft can be360 degree adjusted by electric control.
刀轴可做360度电动控制相位调整。
9.
Optimization Design of Tool Path for Point Seat Control in Manufacturing;
点位控制加工中刀具路径的优化设计
10.
Tool Magazine Control Technique Based on 1PG Positioning Module
基于1PG定位模块的刀库控制技术
11.
A New Approach to Compound Tool Path Generation Based on Discrete Cutter Locations
基于离散刀位点的复合刀具路径生成方法研究
12.
On the Compensation Techniques of Rectifying the Deviation of Culteries in Workpiece Process with Multitools of Numerically Controlled Lathe;
数控车床多刀具加工时刀具偏差的校正方法
13.
Practical Methods of Tool Setting on CNC Lathe and Application of Tool Compensation
数控车床实用对刀方法及刀具补偿的应用
14.
Principles and General Service Methods of Presetting Cutter in HNC Lathe
数控机床的对刀原理及常用的对刀方法
15.
Hydraulic System for Cutter Head of Shield Tunneling Machine Based on Self-adaptive Power Control Method;
盾构刀盘驱动液压系统及其功率自适应控制方法研究
16.
AUTOMATIC KNIFE INPUT DEVICE; GAS PRESSURE CONTROL, EASY TO BE OPERATED.
自动进刀装置，采气压控制，方便操作。
17.
Research of DC Motor s Position Control Based on DSP;
基于DSP的直流电机定位控制方法研究
18.
Research on Offset Optimization about Signalized Coordinated Intersections;
交叉口协调控制相位差优化方法研究