1.
Research on Non-uniform Wall Thickness of Thin-wall Pipe Rolled by Three-high Pipe Mill
三辊轧管机薄壁管轧制壁厚不均的分析
2.
Elimination of Shrinkage Porosity in Low Pressure Casting Large Castings with Varied Thickness
低压铸造大型壁厚不均铸件缩松的解决
3.
Technical Approach to Prevention of Longitudinal Spiral Eccentricity in Tail End of Cold-drawn Light-wall Seamless Steel Pipe
防止冷拔薄壁无缝钢管尾部产生纵向螺旋形壁厚不均的技术探讨
4.
Structural Behavior of Tapered Steel Storage Tanks under Measured Differential Settlement;
变壁厚钢储罐在实测不均匀沉降下的结构性能
5.
Effect of Thickness Nonuniformity of Resonator on the HRG Accuracy
半球谐振子薄壁厚度不均匀性对陀螺精度的影响
6.
Results Both lesion show annular reinforcement.
结果 两者病灶均呈环状强化 ,胶质瘤的环状强化壁厚簿不匀 ,都在近脑中线侧较厚 ;
7.
A supportive tissue of plants, consisting of elongated, living cells with unevenly thickened walls.
厚角组织植物的一种支持组织，由延长的活细胞组成，细胞壁厚薄不均
8.
⑧Abnormal thickening of the bowel walls(n=1).
⑧1例直肠壁和乙结肠肠壁不规则增厚。
9.
An Investigation on the Polymer Precision Extrusion and Uniformity of Wall Thickness;
高聚物精密挤出及其制品壁厚均匀性的研究
10.
Collapsing Strength Analysis of Extra-heavy Wall Casing Under Nonuniform Loads
特厚壁套管在非均载荷下的抗挤强度分析
11.
Research and Development of Large-sized Heavy-wall TP347H Stainless Steel Pipe
大直径厚壁TP347H不锈钢管的研制与开发
12.
Analysis on Elastoplastic of Thick Spherical Shell with Different Modulus of Tension and Compression
不同拉压模量厚壁球壳的弹塑性分析
13.
Centrifugal casting，compact structure，free from pinhole porosity and slag，smooth surface and even wall thickness.
高速离心铸造,组织致密,无砂眼、夹渣，表面光滑、壁厚均匀。
14.
However, the number of vascular bundles and the development of sclerenchyma are not uniform with each other.
然而,维管束的数目及厚壁组织的发育各不相同。
15.
They are thick-walled, are not easily detached from the mycelium.
它们是厚壁的，是不易从菌丝体上脱落的。
16.
Evaluation of Uncertainty in Ultrasonic Measurement of Wall Thickness of In-use Oil Well Tubing
在役油井管壁厚度超声波测量不确定度的评估
17.
Research on Weld Toughness of X80 Heavy Section Pipeline Steel at Different Welding Speeds
X80厚壁管线钢不同焊接速度下焊缝韧性研究
18.
Experimental Study on Deformation Uniformity in Thickness Direction of 2205 Duplex Stainless Steel during Hot Rolling
2205双相不锈钢热轧厚向变形均匀性的实验研究