1.
Study on the Technology Parameters Optimization of Hydraulic Slotting Casing Perforation;
水力喷砂割缝射孔工艺参数优化研究
2.
Experimental Research on Parameters of Nozzle Slotted in Non-submerged High Pressure Swirling Jet
非淹没高压旋转水射流喷嘴割缝参数试验研究
3.
Experimental Study of Hydrajet Nozzle on Abrasion
水力喷砂射孔压裂喷嘴的损伤试验与分析
4.
System Design of Hydraulic for Jet Pump Rank Sand
用于油井排砂的水力喷射泵系统设计
5.
Design Study on Spouted Water Process Parameters of Hydraulic Incision Facility
水力割缝工具射流工艺参数设计研究
6.
Study on Method of Determining Depth about Hydraulic Jetting Sand Perforation With Coiled Tubing
连续油管水力喷砂射孔深度确定方法探究
7.
Typical Structure and Application of Downhole Sand Jet Fracturing Tools
井下水力喷砂压裂工具典型结构及应用
8.
Application of Hydrojet Pump Negative Pressure Sand Washing Technology in Jinzhou Oilfield
水力喷射泵负压冲砂技术在锦州油田的应用
9.
Erosion Wear Behavior of Slotted Screen Liner for Sand Control
石油防砂割缝筛管的冲蚀磨损性能研究
10.
Testing study of methane drainage by bore and hydraulic-cutting seam from low permeability coal seam
低渗透煤层钻孔与水力割缝瓦斯排放的实验研究
11.
The Application of Finite Element Method in the Strength Analysis of Casing after Hydraulic Sand Blast Slotting and the Optimization of Its Technological Parameters;
有限元法在水力割缝套管强度分析及工艺优化中的应用
12.
Cause and control of the crack and sugaring of the cement mortar screed-coat
水泥砂浆找平层裂缝和起砂的成因及控制
13.
The channel sand is not of the cut-and-fill type.
水道砂岩不是切割--充填类型的。
14.
Research on Stress Sensitivity and Prediction of Fracture Width in Naturally Fractured Sandstone Reservoirs;
裂缝性砂岩油层应力敏感性及裂缝宽度研究
15.
Analysis of the cement stabilization grit base course crack and prevention
水泥稳定砂砾基层的裂缝分析与防治
16.
Study on the Pressure Field in Fracture of FracPac Process;
压裂防砂过程中裂缝中的压力场研究
17.
RESEARCH ON FLOOD CONTROL MEASURES IN CRACKS-PORE EDGE WATER RESERVOIR
砂岩裂缝—孔隙型边水气藏治水措施研究
18.
Channels are incised by streams into the underlying red siltstones.
古河道由水流切割而侵入下伏的红色粉砂岩中。