1.
Staging: Process of covering bare metal, to protect lines or dots from being etched, in making of photoengraving and gravure cylinder.
防蚀处理:制电版或照相凹版时，作保护金属表面，防止网点或线条被腐蚀的工作。
2.
Special Anti corrosion coating in and outside.
内外部均作特殊的防锈防腐蚀处理。
3.
Bolts and nuts are plated for corrosion resistance.
螺栓和螺母经过电镀防腐蚀处理。
4.
The whole truck is under repeated antirust pickling, then goes through high temperature pre-painting, antirust and anti-corrosion process.
全车经多道酸洗防锈处理，再经高温烤漆，防锈、蚀。
5.
Pretreatment for Resisting Concrete Corrosion by Microorganism;
基于生物法防止混凝土构件腐蚀的预处理研究
6.
Corrosion and Technical Protection in Pretreatment System of the Continuous Catalytic Reformer
催化重整装置预处理系统腐蚀与工艺防护
7.
CORROSION AND CORROSION PROTECTION OF WATER TREATMENT EQUIPMENT IN BOILERS REUSING HEAVY OIL WASTEWATER
稠油污水回用锅炉水处理设备腐蚀与防护
8.
Corrosion and Protective Measures of Sulfur Recovery & Tail Gas Treatment Plant
硫磺回收及尾气处理装置的腐蚀与防护
9.
Corrosion and prevention of Pretreatment system is CCR Unit
连续催化重整装置预处理系统的腐蚀与防护
10.
It is therefore recommended that plates or inserts containing cooling channels be of a corrosive resistant material or treated to prevent corrosion.
因此推荐模板和入子包括水流道应该用防腐蚀材料或者做防腐蚀处理。
11.
All members that have been treated against corrosion donot need to be treated against corrosion and dust again within20 years on promise that normal maintenance is ensured.
所有经过抗腐蚀处理的构件，保证在正常维护情况下，20年内无需重新进行防腐防锈处理。
12.
Surface protection methods for magnesium alloys and their developing trend were also introduced.
介绍了几种镁合金表面防腐蚀处理方法及其发展趋势。
13.
ALL VENDORS MUST COAT INTERNAL THREADS WITH OIL/RUST INHIBITOR TO PREVENT CORROSION.
中文：所有供货商必须对内螺纹作涂油/防锈处理，避免出现腐蚀。
14.
Research on the Corrosion Mechanism of Galvanization Vessel and Its Resistent Zinc Coatings;
锌锅腐蚀机理及耐锌蚀防护层的研究
15.
Naphthenic Acid Corrosion Mechanisms and anti-Corrosion Measures
原油中环烷酸腐蚀机理及防腐蚀措施
16.
corrosion prevention by galvanic polarization
电流极化抗腐蚀处理
17.
The research of anti-tarnishment of silver antiques treated with corrosion inhibitors under light exposure test;
银器文物缓蚀处理抗光照腐蚀的研究
18.
Hardfaced seating surfaces, large diameter hinge pins, and corrosion resistant bearing surfaces help lengthen operating life in tough surfaces.
经过硬面处理的阀座表面，大直径铰链销，以及防腐蚀轴承表面，有助于延长坚硬表面的使用寿命。