1.
Dynamic Rheological Behavior of EVA/EPDM Modified Bitumen
EVA/EPDM共混改性沥青的动态剪切流变性能
2.
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
3.
Performance Research of Micro-Filtration Membrane Separator with Rotational Flow;
旋转剪切流强化微滤膜器的性能研究
4.
Analysis on the shear modulus of MR elastomer based on chain-like model
基于链化分析的磁流变弹性体剪切模量模型
5.
Research on the Effect of Changqing Waxy Crude Oil Rheology by Shearing Action
剪切历史对长庆含蜡原油流变性的影响研究
6.
Low-temperature Viscosity Determination of SBS Modified Asphalt with Dynamic Shear Rheometer Method
SBS改性沥青低温粘度的动态剪切流变测试方法
7.
Simple Model of Stiffness of Short-leg Shear Walls With Shear Deformation;
考虑剪切变形的短肢剪力墙结构简化模型及抗震性能研究
8.
Research Method of Shear Fatigue Deformation of Asphalt Mixture Based on Shear Capacity
基于抗剪性能的沥青混合料剪切疲劳变形研究方法
9.
Design and Manufacture for Strong Shear Rheometer and Experimental Study of Shear Flow Cavitation;
强剪切流变仪的研制及剪切空化的实验研究
10.
Researches on Microstructures and Properties of Extrusion-Shearing Deformation for the Magnesium Alloy
镁合金挤压剪切复合变形的组织与性能研究
11.
Triaxial shear test on anti-shear properties of asphalt mixture
沥青混合料抗剪性能的三轴剪切试验
12.
EXPERIMENTAL INVESTIGATION ON SHEAR RHEOLOGICAL PROPERTIES OF TUFFLAVA WITH DIFFERENT GRADES
不同围岩级别凝灰熔岩剪切流变特性的试验研究
13.
The shearing strain is essentially inhomogeneous flow of metal.
剪切变形的实质是金属的不均匀流动。
14.
Experiment Research on Cutting Performance of Recycled Concrete and Shear Performance of Recycled Concrete Beam;
再生混凝土剪切性能和梁抗剪性能试验研究
15.
The structure, function and main parameters of a small digital control cut- to-length line use d in cutting silicone plate of transformer cores are introduced.
介绍了用于变压器铁心片剪切的小型数控横剪线的结构、能及其主要性能参数。
16.
Test method of creep properties of adhesive in shear by tension loading (metal to metal)
GB/T7750-1987胶粘剂拉伸剪切蠕变性能试验方法(金属对金属)
17.
Rubber--Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain)
GB/T13937-1992分级用硫化橡胶动态性能的测定强迫正弦剪切应变法
18.
Mechanical Properties and Microstructure of Asymmetrically Rolled Pure Aluminium and Its Shear Deformation Observation;
纯铝异步轧制剪切形变直接观察及组织性能研究