1.
piston cooling gland
活塞冷却填料函压盖
2.
expansion gland
膨胀接头的填料压盖
3.
Gland– two-piece gland/ gland flange is self-aligning to eliminate stem damage from cocked gland.
(8) 压盖-两件式压盖/盖法兰，自行对准调节，防止由于压盖翘起而造成阀杆损坏。
4.
Gland– two piece gland bushing/ packing flange is self-aligning to prevent stem damage for cocked gland.
填料压盖-两件式填料压盖衬套/料法兰能够自动校准，以防止由于填料压盖翘起造成阀杆损坏。
5.
Equally distributed gland bolts provide uniform compression of packing.
均匀分布的压盖螺栓为填料提供均匀的压力。
6.
Study on Structural Techniques of the Sealing Plate;
热水器压力罐不锈钢压盖的结构工艺性研究
7.
Remove the relief valve cover bolts while holding the cover down.
边压住阀盖，边拆卸安全阀阀盖螺栓。
8.
hydrautorque-hinge hatchcover
液压扭转铰链舱口盖
9.
hydrauliccontrol device for hatch cover
舱口盖液压控制装置
10.
Clamp the metal lid down please
请把金属盖压严实。
11.
Pressure Testing Radiator Pressure Cap—Typical
压力测试散热器压力盖—典型的
12.
Make sure you apply pressure to the cover as you lift it straight off.
确保在将阀盖笔直提起的同时有压住阀盖。
13.
Press the back cover lock release button and slide the back cover latch down to open the back cover.
按压后盖锁定释放按钮,向下滑动后盖插锁,打开后盖。
14.
A design impressed on a book cover by such a stamp.
压印用压印器盖出来的书封面上的图案
15.
Incorrect/improperly operating pressure cap.
压力盖工作不正确/不正常。
16.
Then, when the house was nearly completed, and we were looking for something for the front steps, Uncle didn't think that the rock was even good enough for that.
房盖起来，压铺台阶，伯父也没有看上它。
17.
The portion of a garment that covers the lap.
下摆外套下部压住膝盖的部分
18.
Replace cap with the correct rating for the system.
按系统正确的额定值更换压力盖。