1.
Structure Design of Welding Joint in Monel Afloy Lined Steel Plate
蒙乃尔合金复合钢板焊接接头结构设计
2.
Preparation and Investigation on Microstructures of Silicon Monel Alloy;
含硅蒙乃尔合金的制备及组织的研究
3.
Direct Photometric Method for the Determination of Nickel and Copper in Monel Alloy
分光光度法测定蒙乃尔合金中镍量、铜量
4.
The Effect of Trace Element on Microstructure and Properties of Monel Alloy with Silicon;
微量元素对含Si蒙乃尔合金组织及性能的影响
5.
INFLUENCE OF BINDER ON PROPERTIES OF MONEL FILTER CATRIDGE
添加成形剂对蒙乃尔合金过滤管性能的影响
6.
Effect of heat treatment on microstructure and hardness of monel alloy containing silicon
热处理对含Si蒙乃尔合金组织及硬度的影响
7.
Effect of boron on microstructure and properties of Monel alloy with silicon
硼对含Si蒙乃尔合金组织与性能的影响
8.
By enhancing welded construction's rigidity and both side alternative surfacing, the problem of tube plate deformation was solved.
采用提高刚性和正反面交替直道堆焊等方法解决了蒙乃尔合金换热器管板堆焊的变形问题。
9.
Stem made from hardened Monel K500 for strength and durability.
阀杆采用硬化蒙乃尔合金K500，以增加强度和耐久性。
10.
Specification for welding of titanium and titanium alloy clad steel plate
GB/T13149-1991钛及钛合金复合钢板焊接技术条件
11.
The specification for welding of copper and copper alloy clad steel plate
GB/T13147-1991铜与铜合金复合钢板焊接技术条件
12.
The Technology of Steel-Bonded Carbide Powder Being Explosive Compacted and Liquid Sintered on the Surface of Carbon Steel;
钢结硬质合金粉末在钢板表面爆炸成形及烧结复合
13.
Titanium clad steel plate
GB/T8547-1987钛-钢复合板
14.
Titanium clad stainless steel plate
GB/T8546-1987钛-不锈钢复合板
15.
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
16.
However, the welding of dissimilar steels carbon steel or low alloy steel and stainless composite steel demands more welding high-technologies in fabrication and erection of the hydraulic steel structure.
而碳钢、合金钢的复合钢板及异种钢的焊接在水工金属结构制作安装中要求高、度大。
17.
Bonding Mechanism and Strength of Al-Pb Alloy Strips and Hot Dip Aluminized Steel Sheets by Hot Rolling
铝铅轴承合金与热浸铝钢板的热轧复合机制与结合强度
18.
Composite rolling of three-layer iron-based metals of 25Cr5MoA steel/micro-alloyed steel/Q235 steel
25Cr5MoA钢/微合金钢/Q235钢的复合轧制