1.
Manufacturing and Properties of Wollastonite-filled and Reinforced Polypropylene
针状硅灰石填充增强聚丙烯的制备工艺
2.
Nanometer Al_2O_3 Reinforced Polyetheretherketone (PEEK) Composites and Their Properties;
纳米氧化铝粉体填充增强聚醚醚酮复合材料及其性能研究
3.
The Study on Build up Strength and Toughness in the Resin Matrix Composite Material Filled with Nonmetal Mineral Filler FSMF;
非金属矿物填料FSMF填充树脂复合材料的增强增韧研究
4.
The Filling Effect of Epoxy Reinforced with Short Fibreglass;
填充物对短玻璃纤维增强环氧树脂断裂的影响
5.
The study on the reinforcement of filling amount of potassium titanate whisker on the bending strength of dental composite resin
钛酸钾晶须的填充量对其增强牙用复合树脂抗弯强度的影响
6.
Symbols of plastics and resins--Part 2: Fillers and reinforcing materials
GB/T1844.2-1995塑料及树脂缩写代号第二部分:填充及增强材料
7.
Study on Mechanical Properties of PTFE Composites Reinforced by Filling Modification;
填充改性增强聚四氟乙烯复合材料的力学性能研究
8.
Study on the Properties of PTFE Matrix Composites Reinforced by Organic Fibre of PPTA
芳纶纤维填充改性增强聚四氟乙烯复合材料性能研究
9.
Study on Mechanism of SiCp/101Al Matrix Composite TIG Welding Joint with Ti Filler In-situ Reinforcement
填充材料Ti原位增强SiCp/101Al基复合材料TIG焊接头反应机理
10.
Fillers include modifiers, extenders, plasticizer and low friction additives.
填料包括改性剂，填充剂，增塑剂和低摩擦添加剂。
11.
(used of soaps or cleaning agents) having a substance (an abrasive or filler) added to increase effectiveness.
（特别是用来指肥皂或者清洁剂）加入某种物质（研磨剂或者填充剂）以增强其效果。
12.
Fabrication of germanium inverse opal three-dimensional photonic crystal by Low Temperature Plasma Enhance Chemical Vapour Deposition fill techniques
低温等离子体增强化学气相沉积填充法制备Ge反蛋白石三维光子晶体
13.
Repacking while valve is pressurized is not recommended.
不推荐在阀门压力增加时补充填料。
14.
anything added to fill out a whole.
任何增加的用以填充的东西。
15.
With a further increase in gas velocity, the packed bed suddenly "unlocked".
当再增加气速，填充床突然“解锁”了。
16.
Toughening of High filled Polypropylene/Calcium Carbonate Composites
PP/CaCO_3高填充复合体系的增韧研究
17.
Toughening of High Filled Polypropylene Copolymer/Calcium Carbonate Composites with High Density Polyethylene
HDPE对共聚PP/CaCO_3高填充复合材料的增韧
18.
To determine strength of fillingbody by photoelastic mechanics and boundary element method(BEM)
光测力学和边界元法确定充填体强度